Abstract：Under the assumption of pure slip contact along the lining-rock interface and the requirements of the net size and the lining thickness，derivation of shape optimization of a tunnel support was carried out with the objective of the greatest tangential stress along the inner edge of the support being minimized. The optimizing process is to solve a class of inverse geometry problems，and the corresponding forward problem can be solved with the method of conformal mapping of complex variable function in plane elasticity. During the process，the tangential stress along the inner edge of the support was selected as the objective function and coefficients of the mapping function were taken as the design variables. The method of mixed penalty function was used to minimize the objective function. As the objective function reached the minimum value，the optimal shape of support can be obtained. With the optimal shape，stress state in tunnel support was improved most effectively and the tangential stress concentration along the inner edge of support was minimized.
吕爱钟，陈虹宇，覃 媛，张 宁. 光滑接触条件下隧洞支护断面形状优化[J]. 岩石力学与工程学报, 2014, 33(8): 1563-1571.
LU Aizhong，CHEN Hongyu，QIN Yuan，ZHANG Ning. SHAPE OPTIMIZATION OF TUNNEL SUPPORT SECTION UNDER CONTACT CONDITION OF PURE SLIP. , 2014, 33(8): 1563-1571.
吕爱钟. 高地应力区地下硐室断面形状的选择方法[J]. 煤炭学报，1997，22(5)：495-498.(LU Aizhong. Shape selection method of the underground caverns under high ground stresses[J]. Journal of China Coal Society，1997，22(5)：495-498.(in Chinese))
<body>Your browse does not support frame!</body>
2014, Vol. 33 
