A NONLINEAR DILATANCY MODELS EXTENTION AND VALIDATION FOR COARSED-GRAINED SOILS
PAN Jiajun,CHENG Zhanlin,RAO Xibao,CHEN Yun,XU Han
(Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources,Yangtze River Scientific Research Institute,Wuhan,Hubei 430010,China)
Abstract:Based on hypoelasticity,three-module incremental nonlinear stress-strain relationships of a nonlinear dilatancy model for coarsed-grained soils under triaxial stress condition is generalized into a three-dimensional stress-strain relationship,and both tensor form and matrix form are given for finite element implementation. The nonlinear dilatancy model is implemented by user subroutine UMAT on ABAQUS finite-element software. The coarsed-grained soils of a rockfill dam sit is selected,conventional large scaled triaxial consolidated drained shear tests under saturated conditions with different confining pressures were calculated by ABAQUS for the coarsed-grained soils,the comparison between calculation results and tests results has been employed to validate the tensor form and matrix form and the subroutine.
程展林,丁红顺,吴良平. 粗粒土试验研究[J]. 岩土工程学报,2007,29(8):1 151-1 158.(CHENG Zhanlin,DING Hongshun,WU Liangping. Experimental study on mechanical behavior of granular material[J]. Chinese Journal of Geotechnical Engineering,2007,29(8):1 151-1 158.(in Chinese))
[2]
程展林,潘家军. 水布垭面板堆石实测应力变形分析[J]. 岩土工程学报,2012,34(12):1 132-1 138.(CHENG Zhanlin,PAN Jiajun. Analysis of monitoring data of stress and deformation for Shuibuyaconcrete face rockfill dam[J]. Chinese Journal of Geotechnical Engineering,2012,34(12):1 132-1 138.(in Chinese))
[3]
DUNCAN J M,CHANG C Y. Nonlinear analysis of stress and strain in soils[J]. Journal of Soil Mechanics and Foundation Division,ASCE. 1970,96(5):1629-1653.
[4]
DUNCAN J M,BYRNE P M,WONG K S,et al. Strength,stress-strain and bulk modulus parameters for finite element analysis ofstress and movement in soil masses[R].Berkerley:University of California,1980.
[5]
沈珠江. 土体应力应变分析中的一种新模型[C]// 第五届土力学及基础工程学术研讨会论文集. 北京:中国建筑工业出版社,1990:142-147.(SHEN Zhujiang. A new model of stress and strain analysis for soils[C]∥ Proceedings ofthe 5thSymposium on Soil Mechanics and Foundation. Beijing:China Architectureand Building Press,1990:142-147.(in Chinese))
[6]
殷宗泽,卢海华,朱俊高. 土体的椭圆-抛物双屈服面模型及其柔度矩阵[J]. 水利学报,1996,22(12):23-28.(YINZongze,LUHaihua,ZHUJungao. Elliptic-parabolic double yield surface model for soil and its flexibility matrix[J]. Journal of Hydraulic Engineering,1996,22(12):23-28.(in Chinese))
[7]
高莲士,赵红庆,张丙印. 堆石料复杂应力路径试验及非线性K-G模型研究[C]// 国际高土石坝学术研讨会论文集. [S.l.]:[s.n.],1993:110-117.(GAO Lianshi,ZHAO Hongqing,ZHANG Bingyin. Complex stress path test on rockfill materials and study on K-Gnonlinear Model[C]//Proceedings of the International Conference on High Earth-Rock Dam. [S.l.]:[s.n.],1993:110-117.(in Chinese))
[8]
曾以宁,屈智炯. 土的非线性模型—K-G模型研究[C]// 土的抗剪强度与本构关系学术讨论会论文集. [S.l.]:[s.n.],1985:213-224.(ZENG Yining,QU Zhijiong. Study on K-G nonlinear model[C]// Proceedings of Symposium on Soil Shear Strength and Constitutive Relation. [S.l.]:[s.n.],1985:213-224.(in Chinese))
[9]
张丙印,于玉贞,张建民. 高土石坝的若干关键技术问题[C]// 第八届土力学及基础工程学术研讨会论文集. 北京:中国建筑工业出版社,2003:163-186.(ZHANG Binyin,YU Yuzhen,ZHANG Jianming. The key questions of high earth-rock dam[C]// Proceedings of the 8thSymposium on Soil Mechanicsand Foundation. Beijing:China Architectureand Building Press,2003:163-186.(in Chinese))
[10]
程展林,姜景山,丁红顺,等. 粗粒土非线性剪胀模型研究[J]. 岩土工程学报,2010,32(3):331-337.(CHENG Zhanlin,JIANG Jingshan,DING Hongshun,et a1. Nonlinear dilatant model for coarse-grained soils[J]. Chinese Journal of Geotechnical Engineering,2010,32(3):331-337.(in Chinese))
[11]
程展林,陈 欧,左永振,等. 再论粗粒土剪胀性模型[J]. 长江科学院院报,2011,28(6):39-44.(CHENG Zhanlin,CHEN Ou,ZUO Yongzhen,et al. Further discussion on dilatancy model for coarse- grained soils[J]. Journal of Yangtze River Scientific Research Institute,2011,28(6):39-44.(in Chinese))
[12]
Hibbitt,Karlsson andSorensen,Inc..ABAQUS user'smanuals version 6.3[M]. Rhode Island:Hibbitt,KarlssonandSorensen,Inc.,2002.
[13]
TRUESDELLC. Hypeo-elasticity[J]. Journal of Rational Mechanics and Analysis,1955,4(1):83-133.