|
[1] 高全臣,张金泉. 煤矿爆破实用手册[M]. 北京:煤炭工业出版社,2008:291–292.(GAO Quanchen,ZHANG Jinquan. Practical handbook of blasting in coal mines[M]. Beijing:China Coal Industry Publishing House,2008:291–292.(in Chinese))
[2] 林大能,陈寿如. 直眼掏槽效率敏感因子的理论与试验分析[J]. 煤炭学报,2005,30(1):40–43.(LIN Daneng,CHEN Shouru. Theoretical and testing study on factors affecting parallel hole cut blasting[J]. Journal of China Coal Society,2005,30(1):40–43.(in Chinese))
[3] 张军辉. 我国煤矿采煤机的研制回顾、现状以及发展[J]. 煤矿机械,2008,29(3):1–3.(ZHANG Junhui. Review,current status and prospect of coal mining machine development in China[J]. Coal Mine Machinery,2008,29(3):1–3.(in Chinese))
[4] 戴 俊. 爆破工程[M]. 北京:机械工业出版社,2005:181–186.(DAI Jun. Blasting engineering[M]. Beijing:China Machine Press,2005:181–186.(in Chinese))
[5] 袁文华,马芹永. 煤矿深部岩石力学性能试验分析与硬岩巷道快速掘进方法研究[J]. 岩石力学与工程学报,2010,29(增1):2 853–2 857.(YUAN Wenhua,MA Qinyong. Study of rock mechanical properties and rapid excavation method for hard rock roadways in deep coal mine[J]. Chinese Journal of Rock Mechanics and Engineering,2010,29(Supp.11):2 853–2 857.(in Chinese))
[6] 林大能,陈寿如. 空孔直眼掏槽成腔模型理论与实践分析[J]. 岩土力学,2005,26(3):479–483.(LIN Daneng,CHEN Shouru. Experimental and theoretical study of parallel hole cut blasting with cavity[J]. Rock and Soil Mechanics,2005,26(3):479–483.(in Chinese))
[7] 郑祥滨,璩世杰,范利华,等. 单螺旋空孔直眼掏槽成腔过程数值模拟研究[J]. 岩土力学,2008,29(9):2 589–2 594.(ZHENG Xiangbin,QU Shijie,FAN Lihua,et al. Numerical simulation of cavity formation process by single helix parallel hole cut blasting[J]. Rock and Soil Mechanics,2008,29(9):2 589–2 594.(in Chinese))
[8] MA Q Y. Rapid excavation by blasting technique for hard rock roadways in high gas coal mine[C]// Proceedings of the International Young Scholars¢ Symposium on Rock Mechanics—Boundaries of Rock Mechanics Recent Advances and Challenges in the 21st Century. Beijing:[s.n.],2008:339–341
[9] 何晓光,周传波. 裂隙岩体爆破理论研究进展[J]. 辽宁科技学院学报,2005,7(4):1–6.(HE Xiaoguang,ZHOU Chuanbo. Research progress in blasting theory for fracture rock mass[J]. Journal of Liaoning Institute of Science and Technology,2005,7(4):1–6.(in Chinese))
[10] 周传波. 深孔爆破一次成井模拟优化与应用研究[博士学位论文][D]. 武汉:中国地质大学,2004.(ZHOU Chuanbo. Study on simulation optimization and application of shaft formation by one deep-hole blasting[Ph. D. Thesis][D]. Wuhan:China University of Geosciences,2004.(in Chinese))
[11] 田建胜,屈凡非. 柱装药双炮孔岩石爆破模型试验[J]. 河南理工大学学报:自然科学版,2008,27(4):446–453.(TIAN Jiansheng,QU Fanfei. Rock blasting model experiment for double boreholes with cylindrical charges[J]. Journal of Henan Polytechnic University: Natural Science,2008,27(4):446–453.(in Chinese))
[12] 马建军,熊祖钊,段卫东,等. 工程爆破模拟试验的相似律[J]. 武汉科技大学学报:自然科学版,2001,24(2):170–173.(MA Jianjun, XIONG Zuzhao,DUAN Weidong,et al. Similarity law in simulation test of engineering blasting[J]. Journal of Wuhan University of Science and Technology:Natural Science,2001,24(2):170–173.(in Chinese))
[13] 宗 琦. 立井冻土掘进爆破参数模型试验研究[博士学位论文][D]. 合肥:中国科学技术大学,2004.(ZONG Qi. Tunneling blasting parameters model experiment study on vertical well freezing soil[Ph. D. Thesis][D]. Hefei:University of Science and Technology of China,2004.(in Chinese))
[14] 王 伟,李小春. 无临空面深层岩体爆破增渗模型试验相似律研究及相似条件的实现[J]. 岩土力学,2009,30(7):1 892–1 898. (WANG Wei,LI Xiaochun. Study of similarity law of model test of blasting enhanced permeability in deep rock mass without free surface and its implementation[J]. Rock and Soil Mechanics,2009,30(7):1 892–1 898.(in Chinese))
[15] 杨仁树,张志帆,孙 强,等. 淮南矿区深部硬岩巷道钻爆技术研究[J]. 煤炭科学技术,2005,33(2):42–45.(YANG Renshu,ZHANG Zhifan,SUN Qiang,et al. Research on drilling and blasting technology for deep mine hard rock roadway in Huainan mining area[J]. Coal Science and Technology,2005,33(2):42–45.(in Chinese))
|