电力隧道先隧后井施工中简易井应用的若干问题研究

doi:10.13722/j.cnki.jrme.2014.s2.053

摘要
图/表
参考文献(11)
相关文章 (15)

全文: PDF (2127 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对电力隧道，提出一种无内支撑、节约高效的圆形简易工作井建设思路，开展简易工作井与常规方案对比分析，借助有限元法分析开口环管片变形对简易工作井参数的敏感性，探讨简易工作井结构设计中的关键技术。研究结果表明：简易工作井施工工艺、可行性及对周围环境影响等方面均优于常规工作井，其造价仅为常规方案的7%，极大节约了成本。简易工作井施工过程中，局部管片破除形成了开口的非稳定结构，导致管片变形显著增大，影响范围主要体现在开口环及其两侧2环管片上，故施工时需对开口环及影响明显的4环管片设置临时支撑，以确保结构安全稳定。管片变形受工作井壁厚与周围软弱土层影响显著，其中最大位移值随井壁厚度的增加近似呈二次方增长，而井的直径与管片开口环数则对管片变形影响较小，工作井尺寸应在满足整体刚度与净空要求的前提下不宜取大。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	莫海鸿1
	2
	杨春山1
	2
	陈俊生1
	2
	鲍树峰1
	2

关键词 ：隧道工程, 电力隧道, 先隧后井, 简易井, 管片变形影响, 关键技术, 有限元法

Abstract：The simply-constructed well which is no inner supporting，efficient and circular was proposed. The comparison between simply-constructed well and conventional scheme was conducted and parameters sensitivity analysis of the well to segment deformation was conducted with finite element method as well as the key technology of structures design was explored. The results show that the construction technology，feasibility and influence on surrounding environment of simply-constructed well are superior to conventional one. The project cost of simply-well is only 7% of the conventional scheme，so it greatly saves the cost. It will form unstable structure when local segments were broken and segment deformations greatly increase. The influencing scope of the deformation is manifested on the snap rings and two segment rings on both sides，so it should add temporary supports for spilt ring and four segment rings which are obviously affected to ensure structures safety. The effect of well thickness and soft soil on segment deformation is significant，while the effect of the diameter and spilt rings is very small. It suggests that the size of working well should not be big on the premise of meeting the requirements of global stiffness and clearance.

Key words： tunnelling engineering electric power tunnel tunnels followed by well excavation simply-constructed well influence of segment deformation key technology finite element method

引用本文:

莫海鸿1，2，杨春山1，2，陈俊生1，2，鲍树峰1，2. 电力隧道先隧后井施工中简易井应用的若干问题研究[J]. 岩石力学与工程学报, 2014, 33(S2): 3817-3824.
MO Haihong1，2，YANG Chunshan1，2，CHEN Junsheng1，2，BAO Shufeng1，2. SEVERAL ISSUES ON SIMPLY-CONSTRUCTED WELL OF ELECTRIC TUNNEL WHEN TUNNELS FOLLOWED BY WELL EXCAVATION. , 2014, 33(S2): 3817-3824.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2014.s2.053 或 https://rockmech.whrsm.ac.cn/CN/Y2014/V33/IS2/3817

[1] YANG C S，MO H H，CHEN J S. Selection of reasonable scheme of entering into a working well in shield construction[J]. Electronic Journal of Geotechnical Engineering，2013，18：3 987–3 998.

[2] 中华人民共和国行业标准编写组. GJB 02——98 广州地区建筑基坑支护技术规定[S]. 广州：[s.n.]，1998.(The Professional Standards Compilation Group of People¢s Republic of China. GJB 02——98 Code for technique of building foundation pit engineering in Guangzhou[S]. Guangzhou：[s.n.]，1998 (in Chinese))

[3] 赵辉. 城市电力电缆隧道的通风设计[J]. 华北电力技术，2009， (6)：11–13.(ZHAO Hui. Ventilation design of urban power cable tunnel[J]. North China Electric Power，2009，(6)：11–13.(in Chinese))

[4] 中华人民共和国国家标准编写组. GB 5027—2007 电力工程电缆设计规范[S]. 北京：人民出版社，2007.(The National Standards Compilation Group of People¢s Republic of China. GB 5027—2007 Code for design of cables of electric engineering[S]. Beijing：People¢s Publishing House，2007(in Chinese))

[5] 杜金龙，杨敏. 邻近基坑桩基侧向变形加固控制分析[J]. 结构工程师，2008，24(5)：93–99.(DU Jinlong，YANG Min. Deflection control analysis of pile adjacent to deep excavation[J]. Structural Engineers，2008，24(5)：93–94.(in Chinese))

[6] CHEN J S，MO H H. Mechanical behavior of segment rebar of shield tunnel in construction stage[J]. Journal of Zhejiang University，2008，9(7)：888–899.

[7] 陈俊生，莫海鸿. 盾构隧道管片施工阶段力学行为的三维有限元分析[J]. 岩石力学与工程学报，2006，25(增2)：3 482–3 489.(CHEN Junsheng，MO Haihong. Three-dimensional finite analysis of mechanical behaviors of shield tunnel segment during construction[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(Supp.2)：3 482–3 489.(in Chinese))

[8] 张海波，殷宗泽，朱俊高，等. 盾构法隧道衬砌施工阶段受力特性的三维有限元模拟[J]. 岩土力学，2005，26(6)：990–994.(ZHANG Haibo，YIN Zongze，ZHU Jungao，et al. Three-dimensional FEM simulation of shield-driven tunnel lining during construction stage[J]. Rock and Soil Mechanics，2005，26(6)：990–994.(in Chinese))

[9] 杨春山，莫海鸿，陈俊生，等. 盾构隧道先隧后井施工法对管片张开量的影响研究[J]. 岩石力学与工程学报，2014，33(增1)：2 870–2 877.(YANG Chunshan，MO Haihong，CHEN Junsheng，et al. Study the influence on segment opening of shield tunneling by tunnels followed by well excavation[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(Supp.1)：2 870–2 877.(in Chinese))

[10] 黄钟晖，廖少明，侯学渊. 错缝拼装衬砌纵向螺栓剪切模型的研究[J]. 岩石力学与工程学报，2004，23(6)：952–958.(HUANG Zhonghui，LIAO Shaoming，HOU Xueyuan. Research on shear model of ring joint bolts in stagger-jointed segmental linings[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(6)：952–958.(in Chinese))

[11] 张新金，刘维宁，路美丽，等. 盾构法与明挖法结合建造地铁车站的结构方案研究[J]. 铁道学报，2009，31(6)：83–90.(ZHANG Xinjin，LIU Weining，LU Meili，et al. Research of metro station structure scheme by enlarging shield tunnel with open cut method[J]. Journal of the China Railway Society，2009，31(6)：83–90.(in Chinese))