关于土体隧道掌子面开挖稳定性的量化探讨

doi:10.13722/j.cnki.jrme.2015.0294

摘要
图/表
参考文献(19)
相关文章 (15)

全文: PDF (1390 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要介绍探索土体隧道掌子面开挖稳定性与施工条件的定量关系。首先，通过分析影响掌子面稳定性的主要因素提出掌子面稳定安全系数关于材料强度参数与施工条件参数的隐函数，并利用多元函数Taylor公式将掌子面稳定安全系数的隐函数变换为关于施工条件参数变量的多项式，然后给出确定单一施工条件参数变化下掌子面稳定系数的具体表达式的技术方法；重点提出采用响应曲面法确定多施工条件参数共同变化时的Taylor展开式。通过理想隧道开挖模型试验阐释该方法的具体应用，最后以狮子垄隧道工程为背景进行实例分析表明：在初始区域U1内Fs的一阶模型是合适的，进而利用最速上升法寻找优化区域U2，并经中心复合设计得到了Fs的二阶模型，经过方差分析验证此模型的有效性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	黄俊1
	2
	党发宁3
	周磊3
	党康宁2
	郭婵娟4
	覃源2

关键词 ：隧道工程, 土体隧道, 掌子面稳定安全系数, 施工条件参数, 多元函数Taylor公式, 响应曲面法

Abstract：The quantitative relationship between the face stability and construction conditions on soil tunnel is introduced. First，an implicit function to strength parameters and construction parameters is proposed by analyzing the safety factor of face stability. The implicit function is transformed to the polynomial expression on construction parameters via multi-function Taylor formula. A technical method of getting the approximate expressions of safety factor of face stability under a single construction parameter is introduced. Mainly，the response surface methodology is used to determine the Taylor expansions of under multiple variables of construction parameters. It illustrated the applications of the proposed methods in ideal tunneling model. Finally，in the Shizilong tunnel project，the results showed that a first-order Fs model of in the initial region of U1 was appropriate，and then gradient ascent method is used to optimized the regional U2. By the central composite design，a validity second-order Fs model is calculated，and the effectiveness was verified by ANOVA.

Key words： tunnelling engineering soil tunnel safety factor of face stability construction parameters multi- function Taylor formula response surface methodology

引用本文:

黄俊1，2，党发宁3，周磊3，党康宁2，郭婵娟4，覃源2. 关于土体隧道掌子面开挖稳定性的量化探讨[J]. 岩石力学与工程学报, 2016, 35(S1): 3127-3137.
HUANG Jun1，2，DANG Faning3，ZHOU Lei3，DANG Kangning2，GUO Chanjuan4，QIN Yuan1. The quantitative analysis of the face stability on soil tunnel. , 2016, 35(S1): 3127-3137.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2015.0294 或 https://rockmech.whrsm.ac.cn/CN/Y2016/V35/IS1/3127

[1] Broms B B，Bennermark H. Stability of clay in vertical openings[J]. Journal of Soil Mechanics and Foundations Div，1967，93(1)：71–94.

[2] Atkinson J H，Potts D M. Stability of a shallow circular tunnel in cohesionless soil[J]. Geotechnique，1977，27(2)：203–217.

[3] Davis E H，Gunn M J，Mair R J，et al. The stability of shallow tunnels and underground openings in cohesive material[J]. Geotechnique，1980，30(4)：397–416.

[4] Leca E，Dormieux L. Upper and lower bound solutions for the face stability of shallow circular tunnels in frictional material[J]. Geotechnique，1990，40(4)：581–606.

[5] Yamamoto K，Lyamin A V，WILSON D W，et.al，Stability of a single tunnel in cohesive–frictional soil subjected to surcharge loading[J]. Canadian Geotechnical Journal，2011，48(12)：1 841–1 854.

[6] Yamamoto K，Lyamin A V，Wilson D W，et al. Stability of a circular tunnel in cohesive-frictional soil subjected to surcharge loading[J]. Computers and Geotechnics，2011，38(4)：504–517.

[7] Sloan S W，Assadi A. Undrained stability of a square tunnel in a soil whose strength increases linearly with depth[J]. Computers and Geotechnics，1991，12(4)：321–46.

[8] Zienkiewicz O C，Humpheson C，LEWIS R W. Associated and non-associated visco-plasticity and plasticity in soil mechanics[J]. Geotechnique，1975，25(4)：671–689.

[9] 郑颖人，邱陈瑜，张红，等. 关于土体隧洞围岩稳定性分析方法的探索[J]，岩石力学与工程学报，2008，27(10)：1 968–1 980. (Zheng Yingren，Qiu Chenyu，Zhang Hong，et al. Exploration of stability analysis methods for surrounding rocks of soil tunnel [J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(10)：1 968–1 980.(in Chinese))

[10] Chambon P，Corté J F. Shallow tunnels in cohesionless soil：stability of tunnel face[J]. Journal of Geotechnical Engineering，1994，120(7)：1 148–1 165.

[11] Mollon G，Phoon K K，Dias D. et al. Validation of a new 2D failure mechanism for the stability analysis of a pressurized tunnel face in a spatially varying sand[J]. Journal of Engineering Mechanics，2011，137(1)：8–21.

[12] Mollon G，Dias D，Soubra A H. Rotational failure mechanisms for the face stability analysis of tunnels driven by a pressurized shield[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2011，35(12)：1 363–1 388.

[13] Perazzelli P，Leone T，Anagnostou G. Tunnel face stability under seepage flow conditions[J] Tunnelling and Underground Space Technology，2014，43：459–469.

[14] Shao C，Lan D S. Optimal control of an earth pressure balance shield with tunnel face stability[J]. Automation in Construction，2014，46：22–29.

[15] Fellin W，King J，Kirsch A，et al. Uncertainty modelling and sensitivity analysis of tunnel face stability[J]. Structural Safety，2010，32(6)：402–410.

[16] Saada Z，Maghous S，Garnier D. Pseudo-static analysis of tunnel face stability using the generalized Hoek-Brown strength criterion[J] International Journal for Numerical and Analytical Methods in Geomechanics，2013，37(18)：3 194–3 212.

[17] Shin J H，Choi Y K，Kwon O Y，et al. Model testing for pipe-reinforced tunnel heading in a granular soil[J]. Tunnelling and Underground Space Technology，2008，23(3)：241–250.

[18] Kamata H，Mashimo H. Centrifuge model test of tunnel face reinforcement by bolting[J]. Tunnelling and Underground Space Technology，2003，18(2)：205–212.

[19] 刘天宇. 平面应变条件下强度折减弹塑性有限元法及其应用[硕士学位论文][D]. 青岛：大连理工大学，2005.(Liu Tianyu. Applications of the elasto-plastic finite element method based on the shear stength reduction technique to slope stability analysis under plane strain condition[M. S. Thesis][D]. Qingdao：Dalian University of Technology，2005.(in Chinese))