(1. School of Resources and Environment Engineering,Wuhan University of Technology,Wuhan,Hubei 430070,China;2. Hubei Key Laboratory of Mineral Resources Processing and Environment,Wuhan University of Technology,Wuhan,Hubei 430070, China;3. Library of Wuhan University of Technology,Wuhan,Hubei 430070,China)
The ore from chute will have negative impact on the wall of the ore pass and it is important to determine the collision position and choose the right protective method for the lifespan extension of ore pass. Based on the erosion-wearing theory,the calculation model of the damage caused by ore impact on ore pass wall is established and the method to calculate the volume loss is determined using Hertz contact theory. According to the structure of chute and ore pass,the motion model of ore is built. Taking the Huaxin limestone mine in Zuangou as an example,the damage characteristics are analyzed. The result shows:the ore will fall into the storage after three times collisions with ore pass wall. The impact area of the upper ore pass wall is small,but the damage is serious. On the contrary,the impact area of the lower ore pass wall is large,but the damage is insignificant. Considering the safety and economic reason,the classified protection measures are proposed. The results are consistent with the actual situation,which shows that the calculation method is suitable for the ore pass with flat wall and is helpful to the protection design of new ore pass.
罗周全,陈 杰,谢承煜,等. 主溜井冲击损伤机制分析及实测验证[J]. 岩土力学,2015,36(6):1 744-1 751.(LUO Zhouquan,CHEN Jie,XIE Chengyu,et al. Mechanism of impact-induced damage of main chute and its experimental validation[J]. Rock and Soil Mechanics,2015,36(6):1 744-1 751.(in Chinese))
[2]
任智刚,马海涛,汪 澍,等. 溜井放矿破坏规律相似性模拟实验研究[J]. 中国安全生产科学技术,2016,(9):98-102.(REN Zhigang,MA Haitao,WANG Shu,et al. Experimental study on damage laws of ore pass based on similarity simulation[J]. Journal of Safety Science and Technology,2016,(9):98-102.(in Chinese))
[3]
秦宏楠,李长洪,马海涛,等. 基于颗粒流的溜井冲击破坏规律研究[J]. 中国安全生产科学技术,2015,(4):20-26.(QIN Hongnan,LI Zhanghong,MA Haitao,et al. Study on impact damage laws of ore pass vased on particle flow[J]. Journal of Safety Science and Technology,2015,(4):20-26.(in Chinese))
[4]
黄 雨,孙启登,许 强. 滚石运动特性研究新进展[J]. 振动与冲击,2010,29(10):31-35.(HUANG Yu,SUN Qideng,XU Qiang. New development of rockfall kinematics study[J]. Journal of Vibration and Shock,2010,29(10):31-35.(in Chinese))
[5]
王学良,张路青,杨志法. 滚石运动的计算方法及其研究中的不确定性[J]. 工程地质学报,2015,23(增l):166-172.(WANG Xueliang,ZHANG Luqing,YANG Zhifa. Approaches for rockfall run-out calculation and uncertainty in rockfall study[J]. Journal of Engineering Geology,2015,23(Supp.l):166-172.(in Chinese))
[6]
宋卫东,王洪永,王 欣,等. 采区溜井卸矿冲击载荷作用的理论分析与验证[J]. 岩土力学,2011,32(2):326-332.(SONG Weidong,WANG Hongyong,WANG Xin,et al. Theoretical analysis and test of impact load due to ore dumping in chute[J]. Rock and Soil Mechanics,2011,32(2):326-332.(in Chinese))
[7]
何思明,吴 永,杨雪莲. 滚石坡面冲击回弹规律研究[J]. 岩石力学与工程学报,2008,27(增1):2 793-2 798.(HE Siming,WU Yong,YANG Xuelian. Study of rock-fall motion on slope[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(Supp.1):2 793-2 798.(in Chinese))
[8]
THORNTON C. Coefficient of restitution for collinear collisions of elastic perfectly plastic spheres[J]. Journal of Applied Mechanics,1997,64(2):383-386.
[9]
候天兴,杨兴国,黄 成,等. 基于冲量定理的滚石对构筑物冲击力计算方法[J]. 岩石力学与工程学报,2015,34(增1):3 116-3 122. (HOU Tianxing,YANG Xingguo,HUANG Cheng,et al. A calculation method based on impulse theorem to determine impact force of rockfall on structure[J]. Chinese Journal of Rock Mechanics and Engineering,2015,34(Supp.1):3 116-3 122.(in Chinese))
[10]
何思明,李新坡,吴 永. 滚石冲击荷载作用下土体屈服特性研究[J].岩石力学与工程学报,2008,27(增1):2 973-2 977.(HE Siming,LI Xinpo,WU Yong. Research on yield property of soil under rock-fall impact[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(Supp.1):2 973-2 977.(in Chinese))
[11]
袁进科,黄润秋,裴向军. 滚石冲击力测试研究[J]. 岩土力学,2014,35(1):48-54.(YUAN Jinke,HUANG Runqiu,PEI Xiangjun. Test research on rockfall impact force[J]. Rock and Soil Mechanics,2014,35(1):48-54.(in Chinese))
[1]
BEN-AMI Y,UZI A,LEVY A. Modelling the particles impingement angle to produce maximum erosion[J]. Powder Technology,2016,301(7):1 032-1 043.
[2]
HUANG C,CHIOVELLI S,MINEV P,et al. A comprehensive phenomenological model for erosion of materials in jet flow[J]. Powder Technology,2008,187(3):273-279.
[3]
BRACCESI C,LANDI L. A general elastic-plastic approach to impact analisys for stress state limit evaluation in ball screw bearings return system[J]. International Journal of Impact Engineering,2007,34(7):1 272-1 285.