Study on the failure mechanism of rock slopes with dipped layered structures under various rock dip conditions
SUN Shuwei1，LI Yuan1，YANG Xiaorui2，HU Jiabing1，LIU Liu1
(1. School of Energy and Mining Engineering，China University of Mining and Technology(Beijing)，Beijing 100083，China；
2. Northern Engineering and Technology Corporation，MCC，Dalian，Liaoning 116622，China)
Abstract：Bedded rock slopes are widely present in the nature. The research of the deformation and failure mechanism of bedded rock slopes is an important topic in slope engineering. Using bottom friction tests and numerical simulation methods，the failure mechanism of bedded rock slopes with different rock dip angles was contrastive analysis. The results show that：(1) the failure mechanism of slopes changes significantly with different rock dip angles. When the dip angle is10°，the failure mode of slopes is slip-tension，when the dip angle is 30°，the failure mode is plane sliding shear，when the dip angle is 45°，the failure mode is slip-compression，and when the dip angle is 75°，the failure mode is bending-toppling. (2) Based on monitoring point image tracking technology，the failure process of bedded rock slopes is obtained，and the displacement results of characteristic points indicate that the deformation and failure of bedded slopes have obvious stages. (3) The safety factor of slopes is non-linearly related to the inclination angle of rock layers. When the inclination angle of rock layers is 0°–25°，the safety factor gradually decreases with the increase of the inclination angle of rock layers. When the inclination angle of rock layers is 25°–70°，the safety factor gradually increases with the increase of the inclination angle of rock layers. After the inclination angle of rock layers is greater than 65°，the safety factor of slopes don’t change much. The results of bottom friction test matches numerical analysis on slope stability closely. The significant difference in stability of bedded rock slopes with different rock dip angles is attributed to the significant changes in slope failure mechanisms. The findings of this study can provide reference for the safety evaluation and disaster identification of bedded rock slopes.
孙书伟1，李 圆1，杨晓锐2，胡家冰1，刘 流1. 不同岩层倾角顺倾层状岩质边坡破坏机制研究[J]. 岩石力学与工程学报, 2024, 43(7): 1607-1620.
SUN Shuwei1，LI Yuan1，YANG Xiaorui2，HU Jiabing1，LIU Liu1. Study on the failure mechanism of rock slopes with dipped layered structures under various rock dip conditions. , 2024, 43(7): 1607-1620.
[1] 王家臣，孙书伟. 露天矿边坡工程[M]. 北京：科学出版社，2016：274–276.(WANG Jiachen，SUN Shuwei. Open pit slope engineering[M]. Beijing：Science Press，2016：274–276.(in Chinese))
[2] YI S，CHEN J，PAN J J，et al. Risk assessment of a layered slope considering spatial variabilities of interlayer and intralayer[J]. Computers and Geotechnics，2023，156：105236.
[3] VYAZMENSKY A，STEAD D，ELMO D，et al. Numerical analysis of block caving-induced instability in large open pit slopes：a finite element/discrete element approach[J]. Rock Mechanics and Rock Engineering，2010，43(1)：21–39.
[4] 敬小明，雍 南. 朱家包铁矿采场西南帮滑坡机制研究及治理方案[J]. 金属矿山，2018，(10)：157–161.(JING Xiaoming，YONG Nan. The landslide mechanism and treatment scheme of southwest sope in Zhujiabao mine[J]. Metal Mine，2018，(10)：157–161.(in Chinese))
[5] VARNES D J. Slope movement types and processes[C]// Landslides，Analysis and Control，Special Report 176：Transportation Research Board. Washington：National Academy of Sciences，1978：11–33.
[6] HOEK E，BRAY J. Rock slope engineering[M]. London：The Institute of Mining and Metallurgy，1981：1–456.
[7] 林 杭，曹 平，李江腾，等. 层状岩质边坡破坏模式及稳定性的数值分析[J]. 岩土力学，2010，31(11)：3 300–3 304.(LIN Hang，CAO Ping，LI Jiangteng，et al. Numerical analysis of failure modes and stability of stratified rock slopes[J]. Rock and Soil Mechanics，2010，31(11)：3 300–3 304.(in Chinese))
[8] STEAD D，WOLTER A. A critical review of rock slope failure mechanisms：The importance of structural geology[J]. Journal of Structural Geology，2015，74(5)：1–23.
[9] 孙书伟，马惠民，张忠平. 顺层高边坡开挖松动区研究[J]. 岩土力学，2008，29(6)：1 665–1 668.(SUN Shuwei，MA Huimin，ZHANG Zhongping. Study on disturbed zone of cutting bedding high rock slope[J]. Rock and Soil Mechanics，2008，29(6)：1 665–1 668.(in Chinese))
[10] 刘 宏，宋建波，向喜琼. 缓倾角层状岩质边坡小危岩体失稳破坏模式与稳定性评价[J]. 岩石力学与工程学报，2006，25(8)：1 606–1 611.(LIU Hong，SONG Jianbo，XIANG Xiqiong. Failure model and stability evaluation of small instable rocks distributed in low-angled stratofabric rock slope[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(8)：1 606–1 611.(in Chinese))
[11] 李鸿鸣，吉 锋，石豫川，等. 顺坡陡–中倾角裂隙组合结构边坡稳定性分析[J]. 科学技术与工程，2020，20(9)：3 509–3 515.(LI Hongming，JI Feng，SHI Yuchuan，et al. Stability analysis of slope with alongslope steep-gentle-dipped fractures[J]. Science Technology and Engineering，2020，20(9)：3 509–3 515.(in Chinese))
[12] 李云鹏，杨治林，王芝银. 顺层边坡岩体结构稳定性位移理论[J]. 岩石力学与工程学报，2000，19(6)：747–750.(LI Yunpeng，YANG Zhilin，WANG Zhiyin. Displacement analysis of structure stability for rock mass bedding slope[J]. Chinese Journal of Rock Mechanics and Engineering，2000，19(6)：747–750.(in Chinese))
[13] WANG Z Y. Research on displacement criterion of structural de-formation and failure for bedding rock slope[J]. Scientia Gelogical Sinica，1998，7(2)：217–224.
[14] ADHIKARY D P，DYSKIN A V. Modelling of progressive and instantaneous failures of foliated rock slopes[J]. Rock Mechanics and Rock Engineering，2007，40(4)：349–362.
[15] 孙书伟，朱本珍，马惠民. 典型顺层高边坡工程病害的地质力学模型试验研究[J]. 岩土工程学报，2008，30(9)：1 349–1 355.(SUN Shuwei，ZHU Benzhen，MA Huimin. Geomechanical model tests on slope hazards of typical high bedding rock slopes[J]. Chinese Journal of Geotechnical Engineering，2008，30(9)：1 349–1 355.(in Chinese))
[16] WANG Y K，SUN S W，PANG B，et al. Base friction test on unloading deformation mechanism of soft foundation waste dump under gravity[J]. Measurement，2020，163：108054.
[17] 孙书伟，庞 博，刘 流. 露天矿不同排土工艺失稳机制对比试验研究[J]. 岩石力学与工程学报，2021，40(8)：1 713–1 726.(SUN Shuwei，PANG Bo，LIU Liu. Comparative tests on failure mechanisms of waste dumps of open-pit mines with different dumping methods[J]. Chinese Journal of Rock Mechanics and Engineering，2021，40(8)：1 713–1 726.(in Chinese))
[18] 孙书伟，庞 博，刘 流，等. 露天矿排土场土工格栅加固机制试验研究[J]. 岩石力学与工程学报，2022，41(11)：2 320–2 336.(SUN Shuwei，PANG Bo，LIU Liu，et al. Experimental research on reinforcement mechanism of geogrid in open-pit dum[J]. Chinese Journal of Rock Mechanics and Engineering，2022，41(11)：2 320–2 336.(in Chinese))
[19] BRAY J W，GOOMAN R E. The theory of base friction models[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1981，18(6)：453–468.
[20] ITASCA. Fast Lagrangian analysis of continua in 3 dimensions[M]. Minnesota：Itasca Consulting Group，Inc.，2005：218–220.
[21] ZIENKIEWICZ O C，HUMPHESON C L，LEWIS R W. Associated and non-associated visco-plasticity and plasticity in soil mechanics[J]. Geotechnique，1975，25(4)：671–689.
[22] DAWSON E M，ROTH C L，DRESCHER A. Slope stability analysis by strength reduction[J]. Geotechnique，1999，49(6)：835–840.
[23] 孙书伟，陈 冲，丁 辉，等. 微型桩群加固土坡稳定性分析[J]. 岩土工程学报，2014，36(12)：2 306–2 314.(SUN Shuwei，CHEN Chong，DING Hui，et al. Stability analysis of earth slopes reinforced with micropiles[J]. Chinese Journal of Geotechnical Engineering，2014，36(12)：2 306–2 314.(in Chinese))
2024, Vol. 43 
