北山花岗岩细观非均质性对单轴压缩力学特性影响的FDEM数值研究

doi:10.13722/j.cnki.jrme.2021.0284

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (5981 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了研究细观非均质性对北山花岗岩中微裂纹萌生、扩展和贯通等破裂过程的影响，基于有限元/离散元耦合方法(FDEM)和数字图像处理技术(DIP)，结合矿物晶体模型(GBM)，分别构建3类北山花岗岩细观结构表征模型：聚类均布模型、Voronoi颗粒模型和聚类镶嵌模型。基于3类模型开展了单轴压缩试验研究，探究细观非均质性对北山花岗岩力学特性、声发射(AE)特征以及颗粒尺度裂纹扩展规律的影响。研究结果表明：3类模型均能捕获从微破裂损伤至宏观破裂的演化过程，即首先以晶间张拉裂纹为主，随后产生穿晶断裂，转变为以晶内裂纹为主，张拉破坏占主导地位；细观结构表征方式对模拟岩石的特征应力(启裂应力和损伤应力)控制效应非常显著；Voronoi颗粒模型和聚类镶嵌模型的AE特征与室内试验更为吻合；硬矿物含量的增大，会导致单轴抗压强度、特征应力和弹性模量增大，而泊松比反之；颗粒尺寸的增大，会导致单轴抗压强度和损伤应力明显减小；特征应力与刚度非均质性因子呈负相关。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张世瑞1
	2
	邱士利1
	2
	李邵军1
	2
	李平3
	王旭1
	2
	胡训健1
	2

关键词 ：岩石力学, 花岗岩, 非均质性, 有限元/离散元耦合方法, 多尺度晶体模型, 数字图像处理

Abstract：In order to study the influence of the meso-heterogeneity on the initiation，propagation and coalescence of microcracks in Beishan granite，three types of meso-structure characterization models(cluster uniform model，Voronoi grain model and cluster tessellation model) were constructed based the combined finite-discrete element method(FDEM)、digital image processing(DIP) and grain based model(GBM). Based on the three types of models，uniaxial compression tests were carried out to study the influence of heterogeneity on the mechanics characteristics，acoustic emission(AE) characteristics and grain-scale crack propagation law. The research results show that three types of models can capture the evolution from micro-damage to macro-failure，intergranular tension cracks were firstly generated，then intragranular cracks were generated，and the cracks were mainly tensile cracks. The meso-structure characterizations effect significantly crack initiation stress(CI) and crack damage stress (CD). The AE characteristics of Voronoi grain model and cluster tessellation model were more consistent with the laboratory tests than cluster uniform model. With the increase of hard mineral content，the uniaxial compressive strength(UCS)，elastic modulus，CI and CD increased，but Poisson?s ratio decreased. With the increase of grain size，UCS and CD decreased. With the increase of stiffness heterogeneity factor，UCS，CI and CD decreased.

Key words： rock mechanics granite heterogeneity the combined finite-discrete element method(FDEM) multiscale grain-based model digital image processing

引用本文:

张世瑞1，2，邱士利1，2，李邵军1，2，李平3，王旭1，2，胡训健1，2. 北山花岗岩细观非均质性对单轴压缩力学特性影响的FDEM数值研究[J]. 岩石力学与工程学报, 2022, 41(S1): 2658-2672.
ZHANG Shirui1，2，QIU Shili1，2，LI Shaojun1，2，LI Ping3，WANG Xu1，2，HU Xunjian1，2. Study on mechanical properties of Beishan granite meso-heterogeneity under uniaxial compression with FDEM. , 2022, 41(S1): 2658-2672.

链接本文:

http://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2021.0284 或 http://rockmech.whrsm.ac.cn/CN/Y2022/V41/IS1/2658

[8]	WANG X，CAI M. Modeling of brittle rock failure considering inter- and intra-grain contact failures[J]. Computers and Geotechnics，2018，101：224-244.
[29]	LIM S S，MARTIN C D，AKESSON U. In-situ stress and microcracking in granite cores with depth[J]. Engineering Geology，2012，147-148：1-13.
[31]	MARTIN C D. The strength of massive Lac du Bonnet granite around underground openings[Ph. D. Thesis][D]. Manitoba，Canada：University of Manitoba，1993.
[2]	胡训健，卞康，刘建，等. 细观结构的非均质性对花岗岩蠕变特性影响的离散元模拟研究[J]. 岩石力学与工程学报，2019，38(10)：2 069-2 083.(HU Xunjian，BIAN Kang，LIU Jian，et al. Discrete element simulation study on the influence of microstructure heterogeneity on the creep characteristics of granite[J]. Chinese Journal of Rock Mechanics and Engineering，2019，38(10)：2 069-2 083.(in Chinese))
[6]	ABDELAZIZ A，ZHAO Q，GRASSELLI G. Grain based modelling of rocks using the combined finite-discrete element method[J]. Computers and Geotechnics，2018，103：75-81.
[7]	LI X F，LI H B，ZHAO J. Transgranular fracturing of crystalline rocks and its influence on rock strengths：Insights from a grain-scale continuum-discontinuum approach[J]. Computer Methods in Applied Mechanics and Engineering，2021，373：113462.
[10]	赵星光，马利科，苏锐，等. 北山深部花岗岩在压缩条件下的破裂演化与强度特性[J]. 岩石力学与工程学报，2014，33(增2)：3 665-3 675.(ZHAO Xingguang，MA Like，SU Rui，et al. Fracture evolution and strength characteristics of Beishan deep granite under compression conditions[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(Supp.2)：3 665-3 675.(in Chinese))
[17]	MIAO S T，PAN P Z.，ZHAO X，et al. Experimental study on damage and fracture characteristics of Beishan granite subjected to high-temperature treatment with DIC and AE techniques[J]. Rock Mechanics and Rock Engineering，2021，54：721-743.
[27]	FREDRICH J T，EVANS B，WONG T F. Effect of grain size on brittle and semibrittle strength： implications for micromechanical modelling of failure in compression[J]. Journal of Geophysical Research：Earth Surface，1990，95：10 907-10 920.
[1]	邓朝福，刘建锋，陈亮，等. 不同粒径花岗岩断裂力学行为及声发射特征研究[J]. 岩土力学，2016，37(8)：2 313-2 320.(DENG Chaofu，LIU Jianfeng，CHEN Liang，et al. Fracture mechanical behaviors and acoustic emission characteristics of Beishan granites with different particle sizes[J]. Rock and Soil Mechanics，2016， 37(8)：2 313-2 320.(in Chinese))
[3]	TAPPONNIER P，BRACE W F. Development of stress-induced microcracks in Westerly Granite[J]. International Journal of Rock Mechanics and Mining Sciences，1976，13：103-112.
[4]	TANG C A，LIU H，LEE P，et al. Numerical studies of the influence of microstructure on rock failure in uniaxial compression-Part I：Effect of heterogeneity[J]. International Journal of Rock Mechanics and Mining Sciences，2000，37(4)：555-569.
[9]	LIU Q S，JIANG Y，WU Z J，et al. Investigation of the rock fragmentation process by a single TBM cutter using a Voronoi element-based numerical manifold method[J]. Rock Mechanics Rock Engineering，2018，51：1 137-1 152.
[11]	MUNJIZA A，OWEN D，BICANIC N. A combined finite-discrete element method in transient dynamics of fracturing solids[J]. Engineering Computations，1995，12(2)：145-174.
[13]	LISJAK A，LIU Q，ZHAO Q，et al. Numerical simulation of acoustic emission in brittle rocks by two-dimensional finite-discrete element analysis[J]. Geophysical Journal International，2013，195(1)：423-443.
[14]	ZHAO Q，LISJAK A，MAHABADI O，et al. Numerical simulation of hydraulic fracturing and associated microseismicity using finite-discrete element method[J]. Journal of Rock Mechanics and Geotechnical Engineering，2014，6(6)：574-581.
[16]	金远新，闵茂中，陈伟明，等. 甘肃北山预选区新场地段花岗岩类岩石特征研究[J]. 岩石力学与工程学报，2007，12(增2)：3 974-3 981.(JIN Yuanxin，MIN Maozhong，CHEN Weiming，et al. Study on granite characteristics of Xinchang section of candidate Beishan area，Gansu province[J]. Chinese Journal of Rock Mechanics and Engineering，2007，12(Supp.2)：3 974-3 981.(in Chinese))
[18]	TAN X，KONIETZKY H，CHEN W. Numerical simulation of heterogeneous rock using discrete element model based on digital image processing[J]. Rock Mechanics and Rock Engineering，2016，49：4 957-4 964.
[5]	POTYONDY D O. A grain-based model for rock：approaching the true microstructure[C]// Proceedings of the Rock Mechanics in the Nordic Countries. Kongsberg：[s. n.]，2010：225-234.
[12]	MAHABADI O. Investigating the influence of micro-scale heterogeneity and micro-structure on the failure and mechanical behaviour of geomaterials[Ph. D. Thesis][D]. Toronto，Canada：University of Toronto，2012.
[19]	HU X J，XIE N，ZHU Q Z，et al. Modeling damage evolution in heterogeneous granite using digital image-based grain-based model[J]. Rock Mechanics and Rock Engineering，2020，53：4 925-4 945.
[21]	邱士利，冯夏庭，张传庆，等. 深埋硬岩隧洞岩爆倾向性指标RVI的建立及验证[J]. 岩石力学与工程学报，2011，30(6)：1 126-1 141. (QIU Shili，FENG Xiating，ZHANG Chuanqing，et al. Development and validation of rockburst vulnerability index(RVI) in deep hard rock tunnels[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(6)：1 126-1 141.(in Chinese))
[22]	ZHAO Q，TISATO N，GRASSELLI G，et al. Influence of in situ stress variations on acoustic emissions：a numerical study[J]. Geophysical Journal International，2015，203(2)：1 246-1 252.
[24]	GHAZVINIAN E，PERRAS M A，DIEDERICHS M S. The effect of anisotropy on crack damage thresholds in brittle rocks[C]// Proceedings of the 47th US Rock Mechanics/Geomechanics Symposium. California：American Rock Mechanics Association，2013：23-26.
[26]	PERRAS M A，DIEDERICHS M S. A review of the tensile strength of rock：concepts and testing[J]. Geotechnical and Geology Engineering，2014，32(2)：525-546.
[28]	PENG J，WONG L N Y，TECH C I. Influence of grain size on strength of polymineralic crystalline rock：New insights from DEM grain-based modeling[J]. Journal of Rock Mechanics and Geotechnical Engineering，2021，13(4)：755-766.
[15]	LISJAK A，MAHABADI O，HE L，et al. Acceleration of a 2d/3d finite-discrete element code for geomechanical simulations using general purpose GPU computing[J]. Computer and Geotechnics，2018，100：84-96.
[20]	LIU G，CAI M，HUANG M. Mechanical properties of brittle rock governed by micro-geometric heterogeneity[J]. Computers and Geotechnics，2018，104：358-372.
[30]	LI L，LEE P K K，TSUI Y，et al. Failure process of granite[J]. International Journal of Geomechanics，2003，(3)：84-98.
[23]	TATONE B S A，GRASSELLI G. A calibration procedure for two-dimensional laboratory-scale hybrid finite-discrete element simulations[J]. International Journal of Rock Mechanics and Mining Sciences，2015，75：56-72.
[25]	NICKSIAR M，MARTIN C D. Factors affecting crack initiation in low porosity crystalline rocks[J]. Rock Mechanics and Rock Engineering，2014，47(4)：1 165-1 181.