基于精确矿物晶体模型的玄武岩宏观力学性质及波速分析

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (10375 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要玄武岩工程应用广泛，从矿物晶体尺度出发研究玄武岩的宏观力学性质及波速具有重要意义。基于自主搭建的微观岩石力学试验系统，通过光学显微镜、全自动矿物分析仪、纳米压痕仪及原子力显微镜，分析玄武岩的矿物组成、微观结构、成岩矿物晶体及晶间相力学性质。基于获得的微观参数，建立玄武岩精确矿物晶体模型。通过矿物晶体尺度单轴压缩模拟，分析玄武岩应力演变全过程，得到玄武岩宏观弹性模量为53.59 GPa，抗压强度为166.84 MPa，与宏观试验得到的宏观力学性质误差较小。通过矿物晶体尺度波速模拟，分析玄武岩中波速传播全过程，得到玄武岩纵波波速值为5.71 km/s，与测试得到的纵波波速值5.13 km/s相符。证明基于微观岩石力学试验结果，建立精确矿物晶体模型，从矿物晶体尺度出发，获得任意尺寸、形状岩石宏观力学性质及波速的准确性。该方法填补从矿物晶体尺度出发研究玄武岩宏观力学性质及波速响应的空白，提供岩石跨尺度研究思路，为玄武岩的工程应用提供理论指导。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张俊楷1
	乔江美2
	倪祖甲2
	唐旭海2
	严成增1

关键词 ：岩石力学, 玄武岩, 微观岩石力学试验, 精确矿物晶体模型, 宏观力学性质, 波速

Abstract：Basalt has extensive engineering applications，and studying its macroscale mechanical properties and wave velocity from the mineral crystal scale is of significant importance. Using a self-built microscale rock mechanics experimental system，including optical microscopy，tescan integrated mineral analyser，nanoindentation，and an atomic force microscope，this paper analyzes the mineral composition，microstructure，mineral crystals，and interphase mechanical properties of basalt. Based on the obtained microscale parameters，an accurate grain-based model of basalt was established. Through uniaxial compression simulations at the mineral crystal scale，the entire stress evolution process of basalt was analyzed，resulting in a macroscale elastic modulus of 53.59 GPa and a compressive strength of 166.84 MPa，which are in good agreement with experimental results. Additionally，wave velocity simulations at the mineral crystal scale were conducted to analyze the entire wave propagation process in basalt，and the P-wave velocity was calculated as 5.71 km/s，which is consistent with the measured P-wave velocity of 5.13 km/s. This paper demonstrates that obtaining macroscale mechanical properties and wave velocities of any size and shape rock from the mineral crystal scale is effective，based on the establishment of an accurate grain-based model using microscale rock mechanics experimental results. This method fills the gap in studying the macroscale mechanical properties and wave velocity response of basalt from the mineral crystal scale，providing a cross-scale research approach，and offering theoretical guidance for the engineering applications of basalt.

Key words： rock mechanics basalt microscale rock mechanics experiment accurate grain-based model macroscale mechanical property wave velocity

引用本文:

张俊楷1，乔江美2，倪祖甲2，唐旭海2，严成增1. 基于精确矿物晶体模型的玄武岩宏观力学性质及波速分析[J]. 岩石力学与工程学报, 2025, 44(2): 442-458.
ZHANG Junkai1，QIAO Jiangmei2，NI Zujia2，TANG Xuhai2，YAN Chengzeng1. Investigate the macroscale mechanical property and wave velocity of basalt based on accurate grain-based model. , 2025, 44(2): 442-458.

链接本文:

https://rockmech.whrsm.ac.cn/CN/Y2025/V44/I2/442

[1] JIANG Q，FENG X T，HATZOR Y H，et al. Mechanical anisotropy of columnar jointed basalts：An example from the Baihetan hydropower station，China[J]. Engineering Geology，2014，175(10)：35–45.
[2] 胡伟，邬爱清，陈胜宏，等. 含隐裂隙柱状节理玄武岩单轴力学特性研究[J]. 岩石力学与工程学报，2017，36(8)：1 880–1 888.(HU Wei，WU Aiqing，CHEN Shenghong，et al. Mechanical properties of columnar jointed basalt rock with hidden fissures under uniaxial loading[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(8)：1 880–1 888.(in Chinese))
[3] HE Q Y，LI Y C，SHE S. Mechanical properties of basalt specimens under combined compression and shear loading at low strain rates[J]. Rock Mechanics and Rock Engineering，2019，52(10)：4 101–4 112.
[4] LIU Z J，ZHANG C Q，ZHANG C S，et al. Deformation and failure characteristics and fracture evolution of cryptocrystalline basalt[J]. Journal of Rock Mechanics and Geotechnical Engineering，2019，11(5)：990–1 003.
[5] LIU Z J，WANG H B，ZHOU B. Effect of natural defects on the fracture behaviors and failure mechanism of basalt through mesotesting and FDEM modeling[J]. Engineering Fracture Mechanics，2022，271：108598.
[6] LIU Z J，ZHANG C S，ZHANG C Q，et al. Effects of amygdale heterogeneity and sample size on the mechanical properties of basalt[J]. Journal of Rock Mechanics and Geotechnical Engineering，2022，14(1)：93–107.
[7] LIU Z J，WANG H B，ZHANG C Q，et al. Size dependences of the mechanical behaviors of basalt rock blocks with hidden joints analyzed using a hybrid DFN-FDEM model[J]. Engineering Fracture Mechanics，2021，258：108078.
[8] ZHANG J C，JIANG Q，FENG G L，et al. Geometrical characteristic investigation of the Baihetan irregular columnar jointed basalt and corresponding numerical reconstruction method[J]. Journal of Central South University，2022，29(2)：455–469.
[9] JING L. A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(3)：283–353.
[10] NUR A M，MAVKO G，DVORKIN J，et al. Critical porosity：The key to relating physical properties to porosity in rocks[J]. The Leading Edge，1998，17(3)：357–362.
[11] DURAN C，KHAN A，CEYLAN S，et al. Observation of a core-diffracted P-wave from a farside impact with implications for the lower-mantle structure of Mars[J]. Geophysical Research Letters，2022，49(21)：e2022GL100887.
[12] CHRISTENSEN N I，SALISBURY M H. Velocities，elastic moduli and weathering-age relations for pacific layer 2 basalts[J]. Earth and Planetary Science Letters，1973，19(4)：461–470.
[13] ADELINET M，FORTIN J，GUEGUEN Y，et al. Frequency and fluid effects on elastic properties of basalt；experimental investigations[J]. Geophysical Research Letters，2010，37(2)：L02303.
[14] KARAKUS A，AKATAY M. Determination of basic physical and mechanical properties of basaltic rocks from P-wave velocity[J]. Nondestructive Testing and Evaluation，2013，28(4)：342–352.
[15] JI S C，WANG Q，LI L. Seismic velocities，Poisson's ratios and potential auxetic behavior of volcanic rocks[J]. Tectonophysics，2019，766：270–282.
[16] DI MARTINO M D P，DE SIENA L，TISATO N. Pore space topology controls ultrasonic waveforms in dry volcanic rocks[J]. Geophysical Research Letters，2022，49(18)：e20222GL100310.
[17] ZHANG G P，WEI Z X，FERRELL R R. Elastic modulus and hardness of muscovite and rectorite determined by nanoindentation[J]. Applied Clay Science，2009，43(2)：271–281.
[18] 张帆，郭翰群，赵建建，等. 花岗岩微观力学性质试验研究[J]. 岩石力学与工程学报，2017，36(增2)：3 864–3 872.(ZHANG Fan，GUO Hanqun，ZHAO Jianjian，et al. Experimental study of micro-mechanical properties of granite[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(Supp.2)：3 864–3 872.(in Chinese))
[19] LIU K Q，OSTADHASSAN M，BUBACH B，et al. Statistical grid nanoindentation analysis to estimate macro-mechanical properties of the Bakken Shale[J]. Journal of Natural Gas Science and Engineering，2018，53：181–190.
[20] 张妹珠，许婧璟，江权，等. 基于原子力显微镜的板岩杨氏模量宏微观跨尺度表征方法研究[J]. 岩土力学，2022，43(增1)：245–257.(ZHANG Meishu，XU Jingjing，JIANG Quan，et al. Cross-scale characterization of the Young's modulus of slate using atomic force microscopy[J]. Rock and Soil Mechanics，2022，43(Supp.1)：245–257.(in Chinese))
[21] QIAO J M，NIE M M，ZHAO Q，et al. The effect of weathering on the mineral grains and macroscale Young?s modulus of granites[J]. Rock Mechanics and Rock Engineering，2024，57：5 355–5 370.
[22] LAN H X，MARTIN C D，HU B. Effect of heterogeneity of brittle rock on micromechanical extensile behavior during compression loading[J]. Journal of Geophysical Research：Solid Earth，2010，115(B1)，https://doi.org/10.1029/2009JB006496.
[23] BEWICK R P，KAISER P K，BAWDEN W F，et al. DEM simulation of direct shear；1. Rupture under constant normal stress boundary conditions[J]. Rock Mechanics and Rock Engineering，2014，47(5)： 1 647–1 671.
[24] BAHRANI N，KAISER P K，VALLEY B. Distinct element method simulation of an analogue for a highly interlocked，non-persistently jointed rockmass[J]. International Journal of Rock Mechanics and Mining Sciences，2014，71：117–130.
[25] MAHABADI O K，TATONE B S A，GRASSELLI G. Influence of microscale heterogeneity and microstructure on the tensile behavior of crystalline rocks[J]. Journal of Geophysical Research：Solid Earth，2014，119(7)：5 324–5 341.
[26] ABDELAZIZ A，ZHAO Q，GRASSELLI G. Grain based modelling of rocks using the combined finite-discrete element method[J]. Computers and Geotechnics，2018，103：73–81.
[27] 陈倩，宋文磊，杨金昆，等. 矿物自动定量分析系统的基本原理及其在岩矿研究中的应用——以捷克泰思肯公司TIMA为例[J]. 矿床地，2021，40(2)：345–368.(CHEN Qian，SONG Wenlei，YANG Jinkun，et al. Principle of automated mineral quantitative analysis system and its application in petrology and mineralogy：An example from TESCAN TIMA[J]. Mineral Deposits，2021，40(2)：345–368.(in Chinese))
[28] OLIVER W C，PHARR G M. Measurement of hardness and elastic modulus by instrumented indentation：Advances in understanding and refinements to methodology[J]. Journal of Materials Research，2004，19(1)：3–20.
[29] LI Y C，LUO S M，LU M，et al. Cross-scale characterization of sandstones via statistical nanoindentation：Evaluation of data analytics and upscaling models[J]. International Journal of Rock Mechanics and Mining Sciences，2021，142：104738.
[30] LUO S M，LU Y H，WU Y K，et al. Cross-scale characterization of the elasticity of shales：Statistical nanoindentation and data analytics[J]. Journal of the Mechanics and Physics of Solids，2020，140：103945.
[31] LI M，CHEN W M，LIANG N G，et al. A numerical study of indentation using indenters of different geometry[J]. Journal of Materials Research，2004，19(1)：73–78.
[32] GANNEAU F P，CONSTANTINIDES G，ULM F J. Dual-indentation technique for the assessment of strength properties of cohesive-frictional materials[J]. International Journal of Solids and Structures，2006，43(6)：1 727–1 745.
[33] GIESSIBl F J. Advances in atomic force microscopy[J]. Reviews of Modern Physics，2003，75(3)：949.
[34] HAWKES I，MELLOR M. Uniaxial testing in rock mechanics laboratories[J]. Engineering Geology，1969，4(3)：179–285.
[35] ZHANG Q B，ZHAO J. Determination of mechanical properties and full-field strain measurements of rock material under dynamic loads[J]. International Journal of Rock Mechanics and Mining Sciences，2013，60：423–439.
[36] 中华人民共和国行业标准编写组. GB/T 50266—2013工程岩体试验方法标准[S]. 北京：中国建筑工业出版社，2013.(The Professional Standards Compilation Group of People?s Republic of China. GB/T 50266—2013 Standard for test methods of engineering rock mass[S]. Beijing：China Architecture and Building Press，2013.(in Chinese))
[37] BASS J D. Elasticity of minerals，glasses，and melts[M]. Washington，DC：Mineral Physics and Crystallography：A Handbook of Physical Constants，1995：45–63.
[38] XU J J，ZHANG Y H，RUTQVIST J，et al. Thermally induced microcracks in granite and their effect on the macroscale mechanical behavior[J]. Journal of Geophysical Research：Solid Earth，2023，128(1)：e2022JB024920.
[39] 陈显辉，程毅，谢欣玥，等. 基于纳米压痕试验的大理岩宏微观力学参数关联性研究[J]. 岩土力学，2024，144(12)：3 551–3 564. (CHEN Xianhui，CHENG Yi，XIE Xinyue，et al. Correlation between macro and micro mechanical parameters of marble based on nanoindentation experiment[J]. Rock and Soil Mechanics，2024，144(12)：3 551–3 564.((in Chinese))
[40] JIA S，WANG Y，WANG Q，et al. Research on the micro-scale method for testing the mechanical anisotropy of shale[J]. Journal of Geomechanics，2021，27(1)：10–18.
[41] ELIYAHU M，EMMANUEL S，DAY-STIRRAT R J，et al. Mechanical properties of organic matter in shales mapped at the nanometer scale[J]. Marine and Petroleum Geology，2015，59：294–304.
[42] XU J J，TANG X H，WANG Z Z，et al. Investigating the softening of weak interlayers during landslides using nanoindentation experiments and simulations[J]. Engineering Geology，2020，277：105801.
[43] GOODARZI M，ROUAINIA M，ANLIN A C，et al. Predicting the elastic response of organic-rich shale using nanoscale measurements and homogenisation methods[J]. Geophysical Prospecting，2017，65(6)：1 597–1 614.
[44] WANG K，TAVLO K G，MA L. Advancing the application of atomic force microscopy(AFM) to the characterization and quantification of geological material properties[J]. International Journal of Coal Geology，2021，247(1)：103852.