岩石节理三维表面形貌精细描述与粗糙度定量确定方法的研究

doi:10.13722/j.cnki.jrme.2016.0569

摘要
图/表
参考文献(19)
相关文章 (15)

全文: PDF (785 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要

为了实现对岩石节理粗糙度进行定量描述，分析目前已有研究方法和理论存在的局限性，参考有关岩石节理剪切机制的研究后，提出12个反映节理表面剪切特性与各向异性的三维粗糙度特征参数。并且，基于三维高精度激光扫描与GIS技术，以似斑状花岗岩为例，对其节理表面起伏形态进行精确测定，实现了对三维特征参数的提取。通过对具有明显阶坎或凸起(凹坑)状起伏形态岩石节理的粗糙特性进行精确定向描述基础后，发现大于45°的倾斜面面积对剪切方向的敏感性较大。最终，通过对多个节理样本的室内直剪试验与测量结果的分析，得到了的经验计算公式。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李化1
	2
	张正虎1
	2
	邓建辉1
	2
	魏薇3

关键词 ：岩石力学, 岩石节理, 三维粗糙度系数, 三维激光扫描, GIS

Abstract：

In view of the limits on existing 2D evaluation methods，twelve 3D joint roughness characteristic parameters were proposed to quantitatively evaluate the roughness of rock joints. Those 3D parameters can not only reflect shear characteristics of asperities but incorporate the anisotropy of joint surfaces. Then，using 3D laser scanning and GIS technology，it is found that the digital geometric model of joints can be successfully obtained， then all the value of 3D joint parameters can be precisely calculated. This method was first applied to analyzing the roughness of a typical rock joint surface，on which there were scarps， bulges and pits. Results shows that the area of inclines larger than 45°has a high sensitivity to shear direction. Finally，a series of direct shear tests on natural joint samples were conducted to get the empirical formula of .

Key words： rock mechanics rock joints 3D joint roughness coefficient 3D laser scanning GIS

引用本文:

李化1，2，张正虎1，2，邓建辉1，2，魏薇3. 岩石节理三维表面形貌精细描述与粗糙度定量确定方法的研究[J]. 岩石力学与工程学报, 2017, 36(S2): 4066-4075.
LI Hua1，2，ZHANG Zhenghu1，2，DENG Janhui1，2，WEI Wei3. Precise description of rock joints 3D superficial morphology and the quantitative determination of 3D joint roughness coefficient. , 2017, 36(S2): 4066-4075.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2016.0569 或 https://rockmech.whrsm.ac.cn/CN/Y2017/V36/IS2/4066

[1]	葛云峰，唐辉明，黄磊，等.岩体结构面三维粗糙度系数表征新方法[J]. 岩石力学与工程学报，2012，31(12)：2 508-2 517.(GE Yunfeng，TANG Huiming，HUANG Lei，et al. A new representation method for three-dimensional joint roughness coefficient of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(12)：2 508-2 517.(in Chinese)
[2]	杜时贵.岩体结构面的工程性质[M]. 北京：地震出版社，1999：204-205.(DU Shigui. Engineering properties of rock joints[M]. Beijing：Seismic Press，1999：204-205.(in Chinese))
[3]	BARTON N. Modelling rock joint behaviour from in-situ block tests：implications for nuclear waste repository design[R]. Columbus：Office
	of Nuclear Waste Isolation，1982.
[4]	BARTON N，CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Journal of Rock Mechanics，1977，10(1)：1-54.
[5]	KULATILAKE P H S W，UM J，PAN G. Requirement for accurate quantification of self-affine roughness using the line scaling method[J]. Rock Mechanics and Rock Engineering，1997，30(4)：181-206.
[6]	OREY S. Gaussian sample functions and Hausdorff dimension of level crossing[J]. Probability Theory and Related Fields，1970，15(3)：249-256.
[7]	SAYLES R S，TOMAS R R. The spatial representation of surface roughness by means of the structure functions，a practical alternative to correlation[J]. Wear，1977，42(1)：263-276.
[8]	BERRY M V，LEWIS Z V. On the Weierstrass-Mandelbrot fractal function[J]. Mathematical，Physical and Engineering Sciences，1980，370：459-484.
[9]	MALINVERNO A. A simple method to estimate the fractal dimension of a self-affine series[J]. Geophysical Research Letters，1990，17(11)：1 953-1 956.
[10]	杜时贵，唐辉明. 岩体断裂粗糙度系数的各向异性研究[J]. 工程地质学报，1993，1(2)：32-42.(DU Shigui，TANG Huiming. A study on the anisotropy of joint roughness coefficient in rockmass[J]. Journal of Engineering Geology，1993，1(2)：32-42.(in Chinese))
[11]	BELEM T，HOMAND-ETIENNE F，SOULEY M. Quantitative parameters for rock joint surface roughness[J]. Rock Mechanics and Rock Engineering，2000，33(4)：217-242.
[12]	李庆松，杜守继. 经历剪切变形历史的岩石节理表面粗糙特性分析[J]. 岩土力学，2004，25(6)：850-855.(LI Qingsong，DU Shouji. Surface roughness analysis of rock joints under different shear deformation histories[J]. Rock and Soil Mechanics，2004，25(6)：850-855.(in Chinese))
[13]	ESAKI T，DU S J，MITANI Y，et al. Development of a shear-flow test apparatus and determination of coupled properties for a single rockjoint[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(5)：641-650.
[14]	DU S J. Experimental and theoretical research on geometrical- mechanical-hydromechanical characteristics of rock joints[Ph. D. Thesis][D]. Shanghai：Tongji University，1997.
[15]	DU S J，LIU H，SHEN S L，et al. Simulation of the compression and flow process in a rock joint by using GIS[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(3)：1-6.
[16]	曹平，范祥，蒲成志，等. 节理剪切试验及其表面形貌特征变化分析[J]. 岩石力学与工程学报，2011，30(3)：480-485.(CAO Ping，FAN Xiang，PU Chengzhi，et al. Shear test of joint and analysis of morphology characteristic evolution of joint surface[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(3)：480-485.(in Chinese))
[17]	DONG W P，SULLIVAN P J，STOUT K J. Comprehensive study of parameters for characterization 3-D surface topography-III(IV)[J]. Wear，1994，178(1)：29-60.
[18]	周枝华，杜守继. 岩石节理表面几何特性的三维统计分析[J]. 岩土力学，2005，26(8)：1 227-1 232.(ZHOU Zhihua，DU Shouji. 3D statistic analysis of geometrical properties of a rock joint[J]. Rock and Soil Mechanics，2005，26(8)：1 227-1 232.(in Chinese))
[19]	BARTON N，BANDIS S. Effects of block size on the shear behavior of jointed rock[C]// Proceedings of the 23rd U.S. Symposium on Rock Mechanics. Berkeley：[s. n.]，1982：739-760.