大数量非贯通节理岩体离散元数值模拟实现方法研究

doi:10.13722/j.cnki.jrme.2016.1290

摘要
图/表
参考文献(37)
相关文章 (15)

全文: PDF (2952 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要

为了研究大数量非贯通节理岩体的力学行为，以3DEC离散元软件为平台，提出适用于数值模拟的连通率定量计算的具体方法，其大小等于非贯通节理面积与切割贯通节理面积的比值。其中，非贯通节理面积可由三维岩体结构面网络模拟技术获取的薄圆盘直径，通过面积计算而得，而贯通节理面积与切割岩体形状密切相关，可分为规则岩体与非规则岩体两种情况。规则岩体由联立方程组进行求解，非规则岩体可根据本文提出的点数据搜索法进行获取。采用案例分析对计算结果进行对比验证，结果显示：所提方法能够实现大数量非贯通节理岩体力学行为的离散元数值模拟研究，采用的点数据搜索方法能够解决规则和非规则岩体切割截面面积求解难题，提高数值模拟效率，并且取得了较为可靠的模拟结果。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：岩石力学, 大数量非贯通节理, 结构面网络模拟, 点数据搜索法, 离散元, 3DEC数值模拟

Abstract：

To understand mechanical behaviors of joint rock with large number of non-persistent discontinuities，a new calculation of the connectivity，defined as the radio of non-persistent joint area to apparent persistent joint area，is presented based on the 3DEC discrete element software. The non-persistent joint area can be evaluated according to 3D discontinuities network through calculation of thin disk area. The apparent persistent joint area is closely related to the geometry of cutting rock mass which can be subdivided into regular and irregular shape. In the case of regular rock mass，the apparent persistent joint area is computed by simultaneous equations. For irregular rock mass，the area can be obtained using points searching approach. The proposed method is validated by two examples，and the results show that the study can achieve the numerical simulation of the mechanical behavior with respect to larger number of non-persistent jointed rock mass，and points searching approach can solve the areas of cross sections in both regular and irregular shaped rock mass efficiently. Additionally，simulation results are reliable which have good agreements with reality in two examples.

Key words： rock mechanics larger number of non-persistent joints joints network simulation points data search method discrete element method 3DEC simulation

引用本文:

葛云峰1，2，唐辉明1，3，王亮清1，夏丁1，姜耀飞1，周婷1，钟鹏1. 大数量非贯通节理岩体离散元数值模拟实现方法研究[J]. 岩石力学与工程学报, 2017, 36(S2): 3760-3773.
GE Yunfeng1，2，TANG Huiming1，3，WANG Liangqing1，XIA Ding1，JIANG Yaofei1，. Realization method of discrete element numerical simulation of large number of non-persistent jointed rock mass. , 2017, 36(S2): 3760-3773.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2016.1290 或 https://rockmech.whrsm.ac.cn/CN/Y2017/V36/IS2/3760

[1]	孙广忠. 论“岩体结构控制论”[J]. 工程地质学报，1993，1(1)：14-18.(SUN Guangzhong. On the theory of structure-controlled rockmass[J]. Journal of Engineering Geology，1993，1(1)：14-18.(in Chinese))
[2]	谷德振. 岩体工程地质力学基础[M]. 北京：科学出版社，1979：1-30.(GU Dezhen. Basis of rock engineering geomechanics[M]. Beijing：Science Press，1979：1-30.(in Chinese))
[3]	葛云峰，唐辉明，黄磊，等. 岩体结构面三维粗糙度系数表征新方法[J]. 岩石力学与工程学报，2012，31(12)：2 508-2 517.(GE Yunfeng，TANG Huiming，HUANG Lei，et al. A new representation method for three-dimensional joint roughness coefficient of rock joint[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(12)：2 508-2 517.(in Chinese))
[4]	EINSTEIN H H，VENEZIANO D，BAECHER G B，et al. The effect of discontinuity persistence on rock slope stability[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1983，20(5)：227-236.
[5]	ISRM. Suggested methods for the quantitative description of discontinuities in rock masses[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1978，15(6)：319-368.
[6]	汪小刚，陈祖煜，刘文松. 应用蒙特卡洛法确定节理岩体的连通率和综合抗剪强度指标[J]. 岩石力学与工程学报，1992，11(4)：345-355.(WANG Xiaogang，CHEN Zuyu，LIU Wensong. Determination of joint persistence and shear strength parameters of rock masses by Monte Carlo method[J]. Chinese Journal of Rock Mechanics and Engineering，1992，11(4)：345-355.(in Chinese))
[7]	贾志欣，汪小刚. 包含定位长大裂隙的节理岩体连通率的计算及应用[J]. 岩石力学与工程学报，2001，20(4)：457-461.(JIA Zhixin，WANG Xiaogang. Persistence computation and application of jointed rock mass including large identified discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering，2001，20(4)：457-461.(in Chinese))
[8]	张发明，汪小刚，贾志欣，等. 三维结构面连通率的随机模拟计算[J].岩石力学与工程学报，2004，23(9)：1 486-1 490.(ZHANG Faming，WANG Xiaogang，JIA Zhixin，et al. 3D joint persistence calculation through random simulation[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(9)：1 486-1 490.(in Chinese))
[9]	王晓明，夏露，郑银河，等. 基于三维裂隙连通率的裂隙岩体表征单元体研究[J]. 岩石力学与工程学报，2013，32(增2)：3 297- 3 302.(WANG Xiaoming，XIA Lu，ZHENG Yinhe，et al. Study of representative elementary volume for fractured rock mass based on three-dimensional fracture connectivity[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(Supp.2)：3 297-3 302.(in Chinese))
[10]	卢波，陈剑平，石丙飞，等. 用遗传算法求解节理岩体三维连通率[J]. 岩石力学与工程学报，2004，23(20)：3 470-3 474.(LU Bo，CHEN Jianping，SHI Bingfei，et al. Application of genetic algorithmto evaluate 3D persistence of jointed rock mass[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(20)：3 470-3 474.(in Chinese))
[11]	陈剑平，卢波，谷宪民，等. 用投影法求算岩体结构面三维连通率[J]. 岩石力学与工程学报，2005，24(15)：2 617-2 621.(CHEN Jianping，LU Bo，GU Xianmin，et al. Determining three-dimensional connectivity of rock mass discontinuity by projection[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(15)：2 617-2 621.(in Chinese))
[12]	WANG X G，JIA Z X，CHEN Z Y，et al. Determination of discontinuity persistent ratio by Monte-Carlo simulation and dynamic programming[J]. Engineering Geology，2016，203：83-98.
[13]	范留明，黄润秋. 岩体结构面连通率估计的概率模型及其工程应用[J]. 岩石力学与工程学报，2003，22(5)：723-727.(FAN Liuming，HUANG Runqiu. Probability model for estimating connectivity rate of discontinuities and its engineering application[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(5)：723-727.(in Chinese))
[14]	黄国明，黄润秋. 用窗口法估计不连续面的连通率[J]. 水文地质工程地质，1998，(6)：27-30.(HUANG Guoming，HUANG Runqiu. Estimation of persistence of discontinuities based on the window method[J]. Hydrogeology and Engineering Geology，1998，(6)：27-30.(in Chinese))
[15]	WONG R H C，CHAU K T. Crack coalescence in a rock-like material containing two cracks[J]. International Journal of Rock Mechanics and Mining Sciences，1998，35(2)：147-164.
[16]	白世伟，任伟中，丰定祥，等. 共面闭合断续节理岩体强度特性直剪试验研究[J]. 岩土力学，1999，20(2)：10-16.(BAI Shiwei，REN Weizhong，FENG Dingxiang，et al. Research on the strength behaviour of rock containing coplanar close intermittent joints by directshear test[J]. Rock and Soil Mechanics，1999，20(2)：10-16.(in Chinese))
[17]	GEHLE C，KUTTER H K. Breakage and shear behaviorof intermittent rock joints[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(5)：687-700.
[18]	周小平，王建华，哈秋舲. 压剪应力作用下断续节理岩体的破坏分析[J]. 岩石力学与工程学报，2003，22(9)：1 437-1 440.(ZHOU Xiaoping，WANG Jianhua，HA Qiuling. Failure analysis of intermittent jointed rocks under compression-shear stress[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(9)：1 437- 1 440.(in Chinese))
[19]	PRUDENCIO M，JAN M V S. Strength and failure modes of rock mass models with non-persistent joints[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(6)：890-902.
[20]	夏才初，肖维民，丁增志. 非贯通节理Jennings强度准则的岩桥弱化和节理面起伏角修正[J]. 岩石力学与工程学报，2010，29(3)： 485-492.(XIA Caichu，XIAO Weimin，DING Zengzhi. Modification of Jennings strength criterion for intermittent joints considering rock bridge weaking and joint surface undulating angle[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(3)：485-492.(in Chinese))
[21]	陈新，廖志红，李德建. 节理倾角及连通率对岩体强度、变形影响的单轴压缩试验研究[J]. 岩石力学与工程学报，2011，30(4)： 781-789.(CHEN Xin，LIAO Zhihong，LI Dejian. Experimental study of joint inclination angle and connectivity rate on strengthand deformation properties of rock mass under uniaxial compression[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(4)：781-789.(in Chinese))
[22]	胡荣，朱哲明，胡哲源，等. 爆炸动载荷下裂纹扩展规律的实验研究[J]. 岩石力学与工程学报，2013，32(7)：1 476-1 481.(HU Rong，ZHU Zheming，HU Zeyuan，et al. Experimental study of regularity of crack propagation under blasting dynamic loads[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(7)： 1 476-1 481.(in Chinese))
[23]	CAO P，LIU T，PU C，et al. Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compression[J]. Engineering Geology，2014，187：113-121.
[24]	BAHAADDINI M，SHARROCK G，HEBBLEWHITE B K. Numerical direct shear tests to model the shear behaviour of rock joints[J]. Computers and Geotechnics，2013，13(51)：101-115.
[25]	BAHAADDINI M，HEBBLEWHITE B K，SHARROCK G. Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression[J]. Computers and Geotechnics，2013，49(20)：206-225.
[26]	蒋明镜，孙亚，陈贺，等. 非贯通非共面节理岩体直剪试验DEM数值模拟[J]. 岩石力学与工程学报，2015，34(增2)：3 667- 3 675. (JIANG Mingjing，SUN Ya，CHEN He，et al. DEM numerical simulation of rock masses containing non-coplanar intermittent joints in direct shear test[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(Supp.2)：3 667-3 675.(in Chinese))
[27]	FAN X，KULATILAKE P H S W，CHEN X. Mechanical behavior of rock-like jointed blocks with multi-non-persistent joints under uniaxial loading：a particle mechanics approach[J]. Engineering Geology，2015，190：17-32.
[28]	BONILLA-SIERRA V，DONZE F V，SCHOLTESL，et al. A DEM analysis of rock slope stability in presence of a non-persistent joint[C]// Isrm Congress 2015-International Symposium on Rock Mechanics. [S. l.]：[s. n.]，2015：312-322.
[29]	GHAZVINIAN A，SARFARAZI V，SCHUBERT W，et al. A study of the failure mechanism of planar non-persistent open joints using PFC2D[J]. Rock Mechanics and Rock Engineering，2012，45(5)：677-693.
[30]	KULATILAKE P H S W，UCPIRTI H，WANG S，et al. Use of the distinct element method to perform stress analysis in rock with non-persistent joints and to study the effect of joint geometry parameters on the strength and deformability of rock masses[J]. Rock Mechanics and Rock Engineering，1992，25(4)：253-274.
[31]	WANG S，KULATILAKE P H S W. Linking between joint geometry models and a distinct element method in three dimensions to perform stress analyses in rock masses containing finite size joints[J]. Soils and Foundations，1993，33(4)：88-98.
[32]	VERGARA M R，MICHEL V S J，LORIG L. Numerical model for the study of the strength and failure modes of rock containing non-persistent joints[J]. Rock Mechanics and Rock Engineering，2016，49：1-16.
[33]	刘佑荣，唐辉明. 岩体力学[M]. 武汉：中国地质大学出版社，1999：13-15.(LIU Yourong，TANG Huiming. Rock mechanics[M]. Wuhan：China University of Geosciences Press，1999：13-15.(in Chinese))
[34]	Itasca Consulting Group. 3 dimensional distinct element code users¢s guide[M]. Minneapolis：Itasca Press，2007：103-104.
[35]	吴顺川，高艳华，高永涛，等. 等效节理岩体表征单元体研究[J]. 中国矿业大学学报，2014，(6)：1 120-1 126.(WU Shunchuan，GAO Yanhua，GAO Yongtao，et al. Research on representative element volume of equivalent joint rock mass[J]. Journal of China University of Mining and Technology，2014，(6)：1 120-1 126.(in Chinese))
[36]	ZHANG L，EINSTEIN H H. Estimating the mean trace length of rock discontinuities[J]. Rock Mechanics and Rock Engineering，1998，31(4)：217-235.
[37]	KULATILAKE P H S W，WU T H. Relation between discontinuity size and trace length[C]// Proceeding of the 27th US Symposium on Rock Mechanics. [S. l.]：[s. n.]，1986：130-133.