模拟岩体失效全过程的连续–非连续变形体离散元方法及应用

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (437 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要岩石、混凝土等材料，由于存在细观构造的非均匀性，其损伤–破碎发展过程及破损特征与材料中含有的微裂隙分布相关。基于有限–离散耦合分析的思路，在变形体离散元法的基础上引入基于弹塑性断裂力学的黏聚力模型，在细观单元之间插入界面单元，并对界面单元的刚度等参数进行推导，通过界面单元的起裂、扩展和失效，实现岩体开裂扩展的数值模拟。以岩石单轴压缩、单个颗粒破碎以及边坡失稳3个算例对该方法进行验证，结果表明：所提出的方法能较好地模拟计算裂纹的开裂萌生与扩展，反映岩石介质从小变形到大变形再到破坏的全过程。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：岩石力学, 变形体离散元, 黏聚力模型, 裂纹扩展

Abstract：Rocks，concrete and other materials，due to the existence of inhomogeneity of mesoscopic structure，their fracture-broken development process and damage characteristics are associated with the distribution of micro cracks contained in the materials. Based on the idea of finite-discrete coupling analysis，a cohesive zone model based on elastoplastic fracture mechanics is employed to simulate the fracture of rock. In this model，the cohesive interface elements are inserted into the region of coarse aggregates and the parameters such as stiffness of the interface are deduced. If the interface cracks and failures，fracture will happen. Using uniaxial compression，a single particle breakage and slope instability simulation，the method is verified. The results show that this method can simulate the crack initiation and propagation effectively and reflect the whole process from small deformation to large deformation and failure.

Key words： rock mechanics deformation discrete elements cohesive zone model crack propagation

收稿日期: 2011-05-18

引用本文:

常晓林，胡超，马刚，周伟. 模拟岩体失效全过程的连续–非连续变形体离散元方法及应用[J]. 岩石力学与工程学报, 2011, 30(10): 2004-2011.
CHANG Xiaolin，HU Chao，MA Gang，ZHOU Wei. CONTINUOUS-DISCONTINUOUS DEFORMABLE DISCRETE ELEMENT METHOD TO SIMULATE THE WHOLE FAILURE PROCESS OF ROCK MASSES AND APPLICATION. , 2011, 30(10): 2004-2011.

链接本文:

https://rockmech.whrsm.ac.cn/CN/Y2011/V30/I10/2004

[1]	张楚汉，金峰. 岩石和混凝土离散-接触-断裂分析[M]. 北京：清华大学出版社，2008：1-273.(ZHANG Chuhan，JIN Feng. Discrete- contact-fracture analysis of rock and concrete[M]. Beijing：Tsinghua University Press，2008：1-273.(in Chinese)) " target="_blank">
[2]	OWEN D R J，FENG Y T，DE SOUZA NETO E A，et al. The modeling of multi-fracturing solids and particulate media[J]. International Journal for Numerical Methods in Engineering，2004，60(1)：317-339. " target="_blank">
[3]	MUNJIZA A，OWEN D R J，BICANIC N. A combined finite-discrete element method in transient dynamics of fracturing solids[J]. Engineering Computations，1995，12(2)：145-174. " target="_blank">
[4]	MUNJIZA A. The combined finite-discrete element method[M]. New York：John Wiley and Sons，2004：277-290. " target="_blank">
[5]	KOMODROMOS P I，WILLIAMS J R. Dynamic simulation of multiple deformable bodies using combined discrete and finite element methods[J]. Engineering Computations，2004，21(2/3/4)：431-448. " target="_blank">
[6]	XIANG J S，ANTONIO M，JOHN-PAUL L，et al. On the validation of DEM and FEM/DEM models in 2D and 3D[J]. Engineering Computations，2009，26(6)：673-687. " target="_blank">
[7]	LEWIS R W，GETHIN D T，YANG X S，et al. A combined finite-discrete element method for simulating pharmaceutical powder tabletting[J]. International Journal for Numerical Methods in Engineering，2005，61(7)：853-869. " target="_blank">
[8]	MORRIS J P，RUBIN M B，BLOCK G I，et al. Simulations of fracture and fragmentation of geologic materials using combined FEM/DEM analysis[J]. International Journal of Impact Engineering，2006，33(1/12)：463-473. " target="_blank">
[9]	BAGHERZADEH K H A，MIRGHASEMI A A，MOHAMMADI S. Numerical simulation of particle breakage of angular particles using combined DEM and FEM[J]. Powder Technology，2011，205(1/3)：15-29. " target="_blank">
[10]	BAGHERZADEH KH A，MIRGHASEMI A A，MOHAMMADI S. Micromechanics of breakage in sharp-edge particles using combined DEM and FEM[J]. Particuology，2008，6(5)：347-361.
[11]	HOSSEININIA E S，MIRGHASEMI A A. Effect of particle breakage on the behavior of simulated angular particle assemblies[J]. Particuology，2007，5(5)：328-336. " target="_blank">
[12]	HOSSEININIA E S，MIRGHASEMI A A. Numerical simulation of breakage of two-dimensional polygon-shaped particles using discrete element method[J]. Powder Technology，2006，166(2)：100-112. " target="_blank">
[13]	周伟，常晓林，周创兵，等. 堆石体应力变形细观模拟的随机散粒体不连续变形模型及其应用[J]. 岩石力学与工程学报，2009，28(3)：491-499.(ZHOU Wei，CHANG Xiaolin，ZHOU Chuangbing，et al. Stochastic granule discontinuous deformation model of rock fill and its application[J]. Chinese Journal of Rock Mechanics and Engineering，2009，28(3)：491-499.(in Chinese))
[14]	马刚，周伟，常晓林，等. 锚杆加固散粒体的作用机制研究[J]. 岩石力学与工程学报，2010，29(8)：1 577-1 584.(MA Gang，ZHOU Wei，CHANG Xiaolin，et al. Study of anchorage mechanism of granular mixture[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(8)：1 577-1 584.(in Chinese))
[15]	陈普会，柴亚南. 整体复合材料结构失效分析的黏聚区模型[J]. 南京航空航天大学学报，2008，40(4)：442-446.(CHEN Puhui，CHAI Yanan. Cohesive zone model for failure analysis of integrated composite structures[J]. Journal of Nanjing University of Aeronautics and Astronautics，2008，40(4)：442-446.(in Chinese)) " target="_blank">
[16]	黄刘刚. 黏聚力模型的分析及有限元子程序开发[硕士学位论文][D]. 郑州：郑州大学，2010.(HUANG Liugang. The analysis of cohesive zone model and user-defined subroutine development in finite element method[M. S. Thesis][D]. Zhengzhou：Zhengzhou University，2010.(in Chinese)) " target="_blank">
[17]	梁正召，唐春安，张永彬，等. 岩石三维破裂过程的数值模拟研究[J]. 岩石力学与工程学报，2006，25(5)：931-936.(LIANG Zhengzhao，TANG Chun?an，ZHANG Yongbin，et al. 3D numerical simulation of failure process of rock[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(5)：931-936.(in Chinese))
[18]	BENZEGGAGH M L，KENANE M. Measurement of mixed mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus[J]. Composites Science and Technology，1996，56(4)：439-449. " target="_blank">
[19]	ZOU Z，REID S R，LI S，et al. Modeling interlaminar and intralaminar damage in filament wound pipes under quasi-static indentation[J]. Journal of Composite Materials，2002，36(4)：477-499. " target="_blank">
[20]	尤明庆，苏承东. 大理岩试样的长度对单轴压缩试验的影响[J]. 岩石力学与工程学报，2004，23(22)：3 754-3 760.(YOU Mingqing，SU Chengdong. Effect of length of fine and coarse crystal marble specimens on uniaxial compression tests[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(22)：3 754-3 760.(in Chinese))
[21]	MARSAL R J. Mechanical properties of rock fill[C]// HIRSCHFELD R C，POULOS S J，BERTRAM G E，et al ed. Embankment Dam Engineering. New York：John Wiley and Sons，1973：109-200. " target="_blank">
[22]	WEICHERT R. Theoretical prediction of energy consumption and particle size distribution in grinding and drilling of brittle materials[J]. Particle and Particle Systems Characterization，1991，8(1/4)：55-62. " target="_blank">
[23]	KING R P，BOURGEOIS F. Measurement of fracture energy during single-particle fracture[J]. Minerals Engineering，1993，6(4)：353-367. " target="_blank">
[24]	POTAPOV A V，CAMPBELL C S. Computer simulation of impact-induced particle breakage[J]. Powder Technology，1994，81(3)：207-216. " target="_blank">
[25]	薛世峰，马国顺，葛洪魁，等. 液-固-水化耦合形式的井眼稳定性模型研究[J]. 石油钻探技术，2007，35(1)：41-44.(XUE Shifeng，MA Guoshun，GE Hongkui，et al. Study of a fluid-solid-wetting coupling wellbore stability model[J]. Petroleum Drilling Techniques，2007，35(1)：41-44.(in Chinese))
[26]	黄荣樽，陈勉，邓金根，等. 泥页岩井壁稳定力学与化学的耦合研究[J]. 钻井液与完井液，1995，12(3)：15-21.(HUANG Rongzun，CHEN Mian，DENG Jingen，et al. Study on shale stability of wellbore by mechanics coupling with chemistry method[J]. Driving Fluid and Completion Fluid，1995，12(3)：15-21.(in Chinese))
[27]	李克钢，侯克鹏，张成良. 饱和状态下岩体抗剪切特性试验研究[J]. 中南大学学报：自然科学版，2009，40(2)：538-541.(LI Kegang，HOU Kepeng，ZHANG Chengliang. Experiment study on shear characteristics of saturated rock mass[J]. Journal of Central South University：Science and Technology，2009，40(2)：538-541.(in Chinese)) " target="_blank">
[28]	李克钢，许江，李树春. 三峡库区岩体天然结构面抗剪性能试验研究[J]. 岩土力学，2005，26(7)：1 063-1 067.(LI Kegang，XU Jiang，LI Shuchun. Study on property of rock mass discontinuity shear strength in Three Gorges reservoir area[J]. Rock and Soil Mechanics，2005，26(7)：1 063-1 067.(in Chinese))
[29]	周翠英，邓毅梅，谭祥韶，等. 饱水软岩力学性质软化的试验研究与应用[J]. 岩石力学与工程学报，2005，24(1)：33-37.(ZHOU Cuiying，DENG Yimei，TAN Xiangshao，et al. Experimental research on the softening of mechanical properties of saturated soft rocks and application[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(1)：33-37.(in Chinese))