岩石I/II复合断裂韧度测试的单边切槽深梁试件：数值分析与标定

doi:10.13722/j.cnki.jrme.2015.1450

摘要
图/表
参考文献(50)
相关文章 (15)

全文: PDF (2573 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要提出一种用于岩石材料I/II复合断裂韧度测试的新试件——单边切槽深梁(SENDB)试件，使用有限元法对新试件I(II)型无量纲应力强度因子YI(YII)及无量纲T应力T*进行系统研究和数值标定。研究结果证实SENDB试件可方便地通过调整裂纹倾角、裂缝长度a和支座间距2S实现从纯I型到纯II型任意I/II复合度荷载作用下的岩石断裂韧度测试。与现有弯曲类试件对比分析表明：(1) SENDB试件与经典的单边切槽梁(SENB)试件在几何尺寸和岩石复合断裂韧度测试方法上存在显著差异，SENDB试件是通过调整裂缝倾角实现复合加载，而SENB则是通过移动裂缝位置(无法实现纯II型加载)或四点弯曲试验(加载装置复杂)实现复合加载；(2) 因可方便地加工系列尺寸(包括大尺寸)的试件，新构形相比圆盘类试件在尺寸效应研究方面略有优势；(3) 与国外学者新近提出的ECT试件相比，SENDB试件可选择的量纲一的裂缝长度和量纲一的支座间距范围要更宽泛；(4) 为了实现从纯I型到纯II型整个区间的复合断裂测试，对SENDB，SCB和ECT三种试件，均应使用较小的支座间距或较长的裂缝。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	罗毅1
	2
	任利1
	2
	谢凌志1
	2
	李存宝1
	2
	王俊1
	2
	高超2

关键词 ：岩石力学, 断裂韧度, 单边切槽深梁试样, 三点弯曲试验, 复合断裂

Abstract：A new specimen，namely the single edge notched deep beam(SENDB) specimen，which could test the mixed-mode fracture toughness of rock materials was proposed. The finite element method(FEM) was used to analyze and calibrate the mode I and mode II dimensionless stress intensity factors(i.e. YI and YII) and the dimensionless T-stress(i.e. T*) of the new specimen. Numerical results demonstrated that the SENDB specimen indeed could test the mixed-mode fracture toughness of rocks in a full range of mode mixities from pure mode I to pure mode II by different combinations of the crack inclined angle ，the crack length a and the half distance S between the two bottom supports. The dimensions of the new specimen significantly differed with the ones of the classic single edged notched beam(SENB) specimen，and the mixed-mode loadings can be introduced by an inclined crack in a SENDB specimen while for a SENB specimen mixed-mode loadings are introduced with asymmetry three points bend test(which can not introduce pure mode II loading) or four points bend test(which requires a complex loading fixture). In the aspect of the investigation on scale effect，the SENDB specimen is more suitable than the disc-type specimens，especially for very large size. Compared to the edge crack triangular(ECT) specimen recently proposed by other researchers，the SENDB specimen can conduct mixed-mode fracture tests within a large range of dimensionless crack length and dimensionless span distance. To successfully conduct a pure mode II fracture test，a relative small span distance and a relative long crack are recommended for SENDB，SCB and ECT specimens.

Key words： rock mechanics fracture toughness single edge notched deep beam specimen three-points bend test mixed-mode fracture

引用本文:

罗毅1，2，任利1，2，谢凌志1，2，李存宝1，2，王俊1，2，高超2. 岩石I/II复合断裂韧度测试的单边切槽深梁试件：数值分析与标定[J]. 岩石力学与工程学报, 2016, 35(S2): 3633-3643.
LUO Yi1，2，REN Li1，2，XIE Lingzhi1，2，LI Cunbao1，2，WANG Jun1，2，GAO Chao2. Single edge notched deep beam specimen to test I/II mixed-mode fracture toughness of rocks： numerical analysis and calibration. , 2016, 35(S2): 3633-3643.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2015.1450 或 https://rockmech.whrsm.ac.cn/CN/Y2016/V35/IS2/3633

[1]	陈建国，邓金根，袁俊亮，等. 页岩储层I，II型断裂韧性评价方法研究[J]. 岩石力学与工程学报，2015，34(6)：1-5.(CHEN Jianguo，DENG Jingen，YUAN Junliang，et al. Determination of fracture toughness of modes i and ii of shale formation[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(6)：1-5.(in Chinese))
[2]	宋晨鹏，卢义玉，夏彬伟，等. 天然裂缝对煤层水力压裂裂缝扩展的影响[J]. 东北大学学报：自然科学版，2013，35(5)：756-760. (SONG Chenpeng，LUYiyu，XIA Binwei，et al. Effects of natural fractures on hydraulic fractures propagation of coal seams(edition of natural science)[J]. Journal of Northeastern University(Natural Science)，2014，35(5)：756-760.(in Chinese))
[3]	任利，谢和平，谢凌志，等. 基于断裂力学的裂隙岩体强度分析初探[J]. 工程力学，2012，30(2)：156-162.(REN Li，XIE Heping，XIE Lingzhi，et al. Preliminary study on strength of cracked rock specimen based on fracture mechanics[J]. Engineering Mechanics，2013，30(2)：156-162.(in Chinese))
[4]	何思明，吴永，李新坡. 地震诱发岩体崩塌的力学机制[J]. 岩石力学与工程学报，2010，29(增1)：3 359-3 363.(HE Siming，WU Yong，LI Xinpo. Collapse mechanism of danger rock triggered by earthquake[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(Supp.1)：3359-3363.(in Chinese))
[5]	AL-SHAYEA N A. Crack propagation trajectories for rocks under mixed mode I-II fracture[J]. Engineering Geology，2005，81(1)：84-97.
[6]	GHAZVINIAN A，NEJATI H R，SARFARAZI V，et al. Mixed mode crack propagation in low brittle rock-like materials[J]. Arabian Journal of Geosciences，2013，6(11)：4435-4444.
[7]	DAI F，WEI M，XU N，et al. Numerical assessment of the progressive rock fracture mechanism of cracked chevron notched Brazilian disc specimens[J]. Rock Mechanics and Rock Engineering，2014，48(2)：463-479.
[8]	CHONG K，KURUPPU M. New specimen for fracture toughness determination for rock and other materials[J]. International Journal of Fracture，1984，26(2)：59-62.
[9]	崔振东，刘大安，安光明，等. 岩石I型断裂韧度测试方法研究进展[J]. 测试技术学报，2009，23(3)：189-196.(CUI Zhendong，LIU Daan，An Guangming，et al. Research progress in modeI fracture toughness testing methods for rocks[J]. Journal of Test and Measurement Technology，2009，23(3)：189-196.(in Chinese))
[10]	MACCAGNO T，KNOTT J. The fracture behaviour of PMMA in mixed modes I and II[J]. Engineering Fracture Mechanics，1989，34(1)：65-86.
[11]	樊鸿，张盛，王启智. 用直裂缝平台巴西圆盘确定混凝土的动态起裂韧度[J]. 水利学报，2010，41(10)：1234-1240.(FAN Hong，ZHANG Sheng，WANG Qizhi. Determination of dynamic initiate toughness of concrete using cracked straight-through flattened brazilian disc[J]. Journal of Hydraulic Engineering，2010，41(10)：1234-1240.(in Chinese))
[12]	冯峰，韦重耕，王启智. 用中心直裂纹平台巴西圆盘测试岩石动态断裂韧度的尺寸效应[J]. 工程力学，2009，26(4)：167-173. (FENG Feng，WEI Chonggeng，WANG Qizhi. Size effect for rock dynamicfracture toughness tested with cracked straight through flattened brazilian disc[J]. Engineering Mechanics，2009，26(4)：167-173.(in Chinese))
[13]	王启智，汪冯. 中心直裂纹平台巴西圆盘复合型动态应力强度因子[J]. 力学与实践，2009，31(2)：40-45.(WANG Kun，FENG Feng，WANG Qizhi. Mixed mode dynamic stress intensity factors of cracked straight through flattened brazilian disc specimens[J]. Mechanics in Engineering，2009，31(2)：40-45.(in Chinese))
[14]	AWAJI H，SATO S. Combined mode fracture toughness measurement by the disk test[J]. Journal of Engineering Materials and Technology，1978，100(2)：175-182.
[15]	ATKINSON C，SMELSER R，SANCHEZ J. Combined mode fracture via the cracked Brazilian disk test[J]. International Journal of Fracture，1982，18(4)：279-291.
[16]	WANG Q，FAN H，GOU X，et al. Recalibration and clarification of the formula applied to the ISRM-suggested CCNBD specimens for testing rock fracture toughness[J]. Rock Mechanics and Rock Engineering，2013，46(2)：303-313.
[17]	贾学明，王启智. 标定ISRM岩石断裂韧度新型试样CCNBD的应力强度因子[J]. 岩石力学与工程学报，2003，22(8)：1227-1233. (JIAXueming，WANGQizhi. Calibration of stress intensity factor for new type of fracture toughness specimen ccnbd suggested by ISRM[J]. Chinese Journal of Rock Mechanics And Engineering，2003，22(8)：1227-1233.(in Chinese))
[18]	FOWELL R J. Suggested method for determining mode I fracture toughness using cracked chevron notched Brazilian disc(CCNBD) specimens[J]. International Journal of Rock Mechanics and Mining Sciences andGeomechanics Abstracts，1995，32(1)：57-64.
[19]	黄建安，王思敬. 岩石断裂韧性的试验研究[J]. 岩土工程学报，1982，4(2)：67-74.(HUANG Jianan，WANG Sijing. experimental study of the fracture toughness of rocks[J]. Chinese Journal of Geotechnical Engineering，1982，4(02)：67-74.(in Chinese))
[20]	杨井瑞，张财贵，周妍，等. 用CSTBD试样确定砂岩的动态起裂和扩展韧度[J]. 爆炸与冲击，2014，34(3)：26-271.(YANG Jingrui，ZHANG Caigui，ZHOU Yan，et al. Determination of dynamic initiation toughness and propagation toughness of sandstone using CSTBD specimens[J]. Explosion and Shock Waves，2014，34(3)：264-271.(in Chinese))
[21]	AMROLLAHI H，BAGHBANAN A，HASHEMOLHOSSEINI H. Measuring fracture toughness of crystalline marbles under modes I and II and mixed mode I-II loading conditions using CCNBD and HCCD specimens[J]. International Journal of Rock Mechanics and Mining Sciences，2011，48(7)：1123-1134.
[22]	吴礼舟，王启智，贾学明. 用人字形切槽巴西圆盘(CCNBD)确定岩石断裂韧度及其尺度律[J]. 岩石力学与工程学报，2004，23(3)：383-390.(WULizhou，WANG Qizhi，JIA Xueming. Determination of mode-i rock fracture toughness with cracked chevron notched brazilian disc(CCNBD) and application of size effect law[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(3)：383-390.(in Chinese))
[23]	崔振东，刘大安，安光明，等. V形切槽巴西圆盘法测定岩石断裂韧度KIC的实验研究[J]. 岩土力学，2010，31(9)：2 743-2 748.(CUI Zhendong，LIU Daan，AN Guangming，et al. Research for determining mode I rock fracture toughness KICusing cracked chevron notched brazilian disc specimen[J]. Rock and Soil Mechanics，2010，31(9)：2743-2748.(in Chinese))
[24]	KURUPPU M D，OBARA Y，AYATOLLAHI M R，et al. ISRM-suggested method for determining the mode i static fracture toughness using semi-circular bend specimen[J]. Rock Mechanics and Rock Engineering，2014，47(1)：267-274.
[25]	LIM I L，JOHNSTON I W，CHOI S K，et al. Fracture testing of a soft rock with semi-circular specimens under three-point bending. Part 2-mixed-mode[J]. International Journal of Rock Mechanics and Mining Sciences andGeomechanics Abstracts，1994，31(3)：199-212.
[26]	ALIHA M，HOSSEINPOUR G R，AYATOLLAHI M. Application of cracked triangular specimen subjected to three-point bending for investigating fracture behavior of rock materials[J]. Rock Mechanics and Rock Engineering，2013，46(5)：1023-1034.
[27]	SMITH D，AYATOLLAHI M，PAVIERM. The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading[J]. Fatigue and Fracture of Engineering Materials andStructures，2001，24(2)：137-150.
[28]	邓华锋，李建林，孙旭曙，等. 水作用下砂岩断裂力学效应试验研究[J]. 岩石力学与工程学报，2012，31(7)：1 342-1 348.(DENG Huafeng，LI. Jianlin，SUN Xushu，et al. Experimental research on fracture mechanical effect of sandstone under water corrosion[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(7)：1342-1348.(in Chinese))
[29]	周绍青，郭少华，李显方. T应力对岩石断裂韧度及扩展路径的影响[J]. 中南大学学报：自然科学版，2009，40(3)：797-802.(ZHOU Shaoqing，GUO Shaohua，LI Xianfang. T-stress¢s impact on rock's fracture toughness and propagation path[J]. Journal of Central South University：Natural Science，2009，40(3)：797-802.(in Chinese))
[30]	REN L，ZHU Z，YANG Q，et al. Investigation on the applicability of several fracture criteria to the mixed mode brittle fractures[J]. Advances in Mechanical Engineering，2013，(6)：1104-1116.
[31]	WILLIAMS J，EWING P. Fracture under complex stress—the angled crack problem[J]. International Journal of Fracture Mechanics，1972，8(4)：441-446.
[32]	赵艳华，陈晋，张华. T应力对I-II复合型裂纹扩展的影响[J]. 工程力学，2010，27(4)：5-12(ZHAO Yanhua，CHEN Jin，ZHANG Hua. Influence of T-Stress on crack propagation for I-II mixed mode loading[J]. Engineering Mechanics，2010，27(4)：5-12.(in Chinese))
[33]	WILLIAMS M L. On the stress distribution at the base of a stationary crack[J]. Asme Journal of Applied Mechanics，1957，24：109-114.
[34]	SYSTÈMES D. Abaqus 6.12 theory manual[M]. Providence，Rhode Island：Dassault Systèmes Simulia Corp.，2012.
[35]	KFOURI A P. Some evaluations of the elastic T-term using Eshelby¢s method[J]. International Journal of Fracture，1986，30(4)：301-315
[36]	赵艳华，刘津，甘楠楠. 三点弯曲缺口梁T应力的确定[J]. 工程力学，2013，30(10)：14-18，27.(ZHAO Yanhua，LIU Jin，GAN Nannan. Determination of T-stress for three-point bending notched beams[J]. Engineering Mechanics，2013，30(10)：14-18.(in Chinese))
[37]	赵艳华，甘楠楠. T应力对混凝土断裂参数测定有效性的影响[J]. 大连理工大学学报，2013，53(4)：537-542.(ZHAO Y.anhua，GAN Nannan. Effect of T-stress on validity of determination of concrete f racture parameters[J]. Journal of Dalian University of Technology，2013，53(4)：537-542.(in Chinese))
[38]	ALIHA M R M，SAGHAFI H. The effects of thickness and Poisson¢s ratio on 3D mixed-mode fracture[J]. Engineering Fracture Mechanics，2013，98(1)：15-28.
[39]	ASTM. E1820—01 Standard test method for measurement of fracture toughness[S]. West Conshohocken：ASTM International，2001.
[40]	IM S，BAN H，KIM YR. Characterization of mode-I and mode-II fracture properties of fine aggregate matrix using a semicircular specimen geometry[J]. Construction and Building Materials，2014，52(2)：413-421.
[41]	FUNATSU T，SHIMADA H，MATSUI K，et al. Effect of temperature and confining pressure on mixed-mode(I-II) and mode II fracture toughness of Kimachi sandstone[J]. International Journal of Rock Mechanics and Mining Sciences，2014，67：1-8.
[42]	KURUPPU M D，CHONG K P. Fracture toughness testing of brittle materials using semi-circular bend(SCB) specimen[J]. Engineering Fracture Mechanics，2012，91：133-150.
[43]	BARPI F，VALENTE S，CRAVERO M，et al. Fracture mechanics characterization of an anisotropic geomaterial[J]. Engineering Fracture Mechanics，2012，84：111-122.
[44]	ALIHA M R M，AYATOLLAHI M R. Mixed mode I/II brittle fracture evaluation of marble using SCB specimen[J]. Procedia Engineering，2011，10：311-318.
[45]	REN L，ZHU Z，WANG M，et al. Mixed-mode elastic-plastic fractures：improved r-criterion[J]. Journal of engineering mechanics，2013，140(6)：04014033.
[46]	REN L，XIE L，LI C，et al. Compressive fracture of brittle geomaterial：fractal features of compression-induced fracture surfaces and failure mechanism[J]. Advances in Materials Science and Engineering，2014：814504.
[47]	董世明，汪洋，夏源明. PMMA断裂韧度尺寸相关性的实验研究[J]. 四川大学学报：工程科学版，2006，38(4)：49-52.(DONG Shiming，WANG Yang，XIA Yuanming. Experimental study of size dependence of fracture toughness of PMMA[J]. Journal of Sichuan University：Engineering Science，2006，38(4)：49-52.(in Chinese))
[48]	AYATOLLAHI M，AKBARDOOST J. Size and geometry effects on rock fracture toughness：mode i fracture[J]. Rock Mechanics and Rock Engineering，2014，47(2)：677-687.
[49]	BA?ANT Z P. Size effect on structural strength：a review[J]. Archive of Applied Mechanics，1999，69(9/10)：703-725.
[50]	BA?ANT Z，GETTU R，KAZEMI M. Identification of nonlinear fracture properties from size effect tests and structural analysis based on geometry-dependent R-curves[J]. International Journal of Rock Mechanics and Mining Sciences andGeomechanics Abstracts，1991，28(1)：43-51.